Xerox Color C70 Series Manual de uso rápido - Página 2
Navegue en línea o descargue pdf Manual de uso rápido para Impresora todo en uno Xerox Color C70 Series. Xerox Color C70 Series 3 páginas. Quick network scanning guide
También para Xerox Color C70 Series: Manual de instalación (35 páginas), Manual de instalación (34 páginas), Manual rápido (1 páginas), Manual rápido (1 páginas)
Imprimir página
Adjust Image Transfer
You must perform this adjustment for each paper type loaded in the
printer.
1. Log-in as a System Administrator and access the SIQA tools screen.
2. Touch Adjust Image Transfer.
3. Touch Paper Type, and choose a paper type from the list.
4. Touch Close.
5. Load the selected paper type into Tray 5 (bypass).
Acceptable paper sizes:
•
11 x 17 in.
•
8.5 x 11 in.
•
A3
•
A4
•
SRA3
6. Touch Print Sample.
7. Select a paper size.
8. Select 1 Sided or 2 Sided for the calibration chart.
9. Press the Start button on the control panel to print the calibration
chart.
10. Touch Confirm.
11. Touch Close.
12. Touch Scan Calibration Chart.
Note
If you printed a 2-sided sample, scan both sides.
13. Follow the instructions on the control panel touch screen to complete
the calibration.
14. Touch Confirm to exit the scan.
15. View the adjustment numbers for Side 1 and Side 2.
16. Touch Adjust to complete and save the calibration.
17. Touch Close twice to exit the SIQA tool.
18. To log out of Admin mode, select the Admin icon on the top right of
the screen and touch Logout.
Xerox
®
Color C60/C70 Printer
Simple Image Quality Adjustment (SIQA) Quick Use Guide
Auto Alignment Adjustment
1. Print a duplex copy of the Black Paper PDF file that corresponds to the
paper size used in your region. The PDF files are located on
www.xerox.com/support
under the Color C60/C70 Printer
documentation.
•
11 x 17 in.: SIQA Black Paper for Adjustment-Tabloid.pdf
•
A3: SIQA Black Paper for Adjustment-A3.pdf
2. Log-in as a System Administrator and access the SIQA tools screen.
3. Touch Alignment Adjustment.
4. Touch Auto Alignment Adjustment.
5. Touch Print Calibration Chart.
6. Select a paper tray with 11 x 17 in. or A3 size paper.
7. Set the value for Coverage 1 and Coverage 2 to 1.
8. Touch Print to print the calibration chart.
9. Touch Confirm.
10. Touch Document Feeder Scan Precision Adjustment.
11. Follow the instructions on the control panel touch screen to complete
the scan using the Document Feeder and Document Glass.
a) Position the Black Paper and Calibration Chart as shown on the
Black Paper.
b) Reposition the Calibration Chart as indicated on the control panel
touch screen and Black Paper and then touch Scan for each scan.
c) After all scans are completed, touch Start.
12. Touch Confirm.
13. Touch Print Calibration Chart.
14. Select a paper tray with the correct paper size.
15. Select a coverage value for Coverage 1 and Coverage 2 using the
table below as a guide.
2