Xerox ColorQube 9202 Manual rápido del usuario - Página 12

Navegue en línea o descargue pdf Manual rápido del usuario para Copiadora Xerox ColorQube 9202. Xerox ColorQube 9202 38 páginas. Mfp
También para Xerox ColorQube 9202: Instrucciones de instalación y funcionamiento (14 páginas), Manual del evaluador (28 páginas), Manual rápido (8 páginas), Manual rápido (16 páginas), Instalación y funcionamiento seguros (12 páginas), Instalación y funcionamiento seguros (12 páginas), Cómo hacer una copia (9 páginas)

Imprimir página
Xerox ColorQube 9202 Manual rápido del usuario

Making Copies

Making Copies
1.
Load your documents face up in the Document Feeder Input Tray. Adjust
the top and bottom guides to just touch the documents.
Or...........
Lift up the Document Feeder. Place the document face down onto the
Document Glass and register it to the arrow at the top right rear corner.
Close the Document Feeder.
2.
Press the Clear All (AC) button
once to cancel any previous
screen programing selections.
3.
Press the Services Home
button and select the Copy
option.
The Copy features are
displayed.
4.
Select the required features using the touch screen:
5.
Enter the copy quantity using the numeric keypad and press Start to scan
the originals.
6.
Remove the originals from the Document Feeder or glass when scanning
has completed.
Note:
The Copy job enters the job list ready for printing.
7.
Select Job Status to view the job list and check the status of your job.
If your job is held in the list it requires additional resources to print. To
identify the resources required, select the job and select Job Details.
Once the resources are available the job will print.
12
ColorQube™ 9201/9202/9203
Quick Use Guide
Output Color is used to replicate the original colors or to
change the output to black and white, color or a single color.
Reduce / Enlarge can be used to reduce or enlarge the image
by 25% to 400%.
2-Sided Copying is used to produce 1 or 2 sided copy output.
Paper Supply is used to select the required tray and size of
paper for the copy output.
Copy Output is used to select collate, staple or fold options
(depending on the finishing device available).