Xerox DocuColor 260 Nota de publicación - Página 27

Navegue en línea o descargue pdf Nota de publicación para Copiadora Xerox DocuColor 260. Xerox DocuColor 260 41 páginas. Docucolor advanced multifunction
También para Xerox DocuColor 260: Manual de funciones (12 páginas), Manual del usuario (32 páginas), Especificaciones (8 páginas), Manual del evaluador (14 páginas), Manual del evaluador (16 páginas)

Booklet Maker

PCL printing and Novell systems

If you print a job with Novell, the PCL Separator Page does not work.

Suspend Printing message

If you suspend printing, Command WorkStation and the Fiery Color Server do not display

the copier as offline immediately. The printer offline message is not displayed until the copier

has finished printing that portion of the job.

Preview image of server

When viewing a print job in full screen mode, the preview image of the server is clipped.

AutoSelect and Out-of-paper message

If you set the Paper Source option to AutoSelect, the Fiery Color Server selects the tray

according to its priority list. If a tray runs out of paper in the middle of a job, the Fiery Color

Server requests that you load paper in the first tray on its priority list, but you can load paper

in any tray that supports the paper size needed.

Booklet Maker and Page layout

When you enable the Booklet Maker option, the page layout option (N-up Layout) must be

set to 1-up. If page layout is set to 2-up or greater, the Booklet Maker option will

automatically switch to Off (without a conflict pane indicating the constraint between these

settings).

Booklet Maker on Mac OS X

In the Mac OS X printer driver, if the list of Booklet Maker selections is grayed-out, make

them selectable by doing the following:

1 Set the Duplex option to Top-Top and set Face Down Printing to Face Up.

2 Go to the Summary tab, and then return to the Printer Features tab.

3 Select the Fasten Mode and Booklet Maker options.

Booklet cover single-sided if job is single-sided

If Duplex is Off, a cover cannot be printed on the back side, even if you set Front Cover

or Back Cover to Print on Back or Print on Both. If the job is single-sided, the cover will not

print duplex.

Booklet Output Tray and Folding

If you select the Booklet Tray as Output Tray (Finishing tab), the Single Page Folding option

must also be set to Single Fold.

Page 27