Xerox DocuColor 30 Manual complementario - Página 12
Navegue en línea o descargue pdf Manual complementario para Copiadora Xerox DocuColor 30. Xerox DocuColor 30 17 páginas. Digital color production system
También para Xerox DocuColor 30: Manual de referencia (13 páginas), Manual de configuración (8 páginas), Manual de configuración (4 páginas)
Imprimir página
Xerox DocuColor 40/30 Family Digital Color Production System
lb (90 gsm) paper. Tray capacity will decrease with a
corresponding increase in paper weight.
Trim adjustment should be checked at the beginning of
each job.
The Trimmer40 will trim a minimum thickness of one
sheet and a maximum thickness of a booklet equivalent
to twenty (20) folded sheets of 24lb. paper (about 2 mm).
The Trimmer40 is designed to remove the outside
"shingle" edge (opposite the stitch) of a finished booklet
to make a flat surface. It will not change the overall
booklet size. The maximum trim distance is 12.5 mm.
The width of the booklet after the trim operation may vary
up to 2.0 mm, as measured from the fold to trimmed edge
of the booklet.
Trimmer40 sheet-to-sheet variation within the set,
measured along trimmed edge, may vary by up to 0.5 mm
and peak-to-peak variation within the set, measured
along trimmed edge, may vary by up to 1 mm. See
diagram below.
Sheet to Sheet (0.5 mm)
Booklet after Trim Operation
Folded Side
Trimmed Edge
Peak to Peak (1.0
mm)
Customer Expectations Setting Guidelines
12
It will be necessary to process up to 5 booklets after
staple cassette replacement to prime the stapler.
It is the ASF 40 operators' responsibility to perform the
following maintenance activities:
Replace staple cartridge.
Removal and disposal of trim bin when full.
Cleaning of stapler head when required
Version 6.0
09/08/99