Xerox M123 WorkCentre Manual de referencia

Xerox DocuColor

PDL Reference Guide for the

WorkCentre M128/M123

Accessing Extended

Features

Overview

This document enables you to access the extended features of the WorkCentre

M128/M123 in environments where Xerox does not provide a custom driver.

NOTE:

familiarity with either PostScript (PS) or Printer Command Language (PCL).

This document provides the Printer Description Language (PDL) commands

and syntax for each feature. The following items are also included:

•

A PostScript tables that describes the PostScript features the WorkCentre

supports and the syntax to use the feature.

•

A PCL table that describes the PCL features the WorkCentre supports and

the syntax to use the feature.

This document is not intended to be a complete PS or PCL reference manual: it

is a guide for using the PS and PCL commands with WorkCentre. Refer to

these additional reference materials: PostScript Language Reference Manual,

Third Edition, ISBN 0-201-38922-8, PCL5 Printer Language Technical

Reference Manual Hewlett-Packard manual and Printer Job Language

Technical Reference Manual, Hewlett-Packard manual.

Using this Guide

1. Search the Feature Table to determine whether the feature you wish to use

is supported.

2. Verify that the feature is supported by the platform. For example, the

WorkCentre must have the Finisher option installed to use stapling

commands.

3. Following across the table to find the syntax listed for the PDL examples

shown. Read the Dependencies/Caveats section.

WorkCentre M128/M123 Reference Guide

Some of the commands and syntax used in this documents requires

Xerox WorkCentre

October 20, 2004

dc05cc0364

Page

dc05cc0364