Xerox WorkCentre Pro 123 Manual de la red - Página 5

Quick Network Setup (Static IP)

Prerequisites for Manual Setup of Network Using Static IP Address

Note

On startup, the WorkCentre multifunction device defaults to DHCP to obtain its network configurations,

so DHCP must be turned off by manually entering a static IP address.

Before installing, record the following information for use during setup:

TCP/IP Address:

Gateway Address:

Subnet Mask:

DNS Server Address:

Note

To obtain this information, contact your System Administrator.

Procedure for Manual Setup of Network Using Static IP Address

Power on the device.

Select Login/Logout, and then enter the UserID 11111.

System

Settings.

Select

System

Settings.

Select

Network

Settings.

Select

Protocol

Settings.

Select

Address, and then press

Enter the IP address of the device. If there is an incorrect IP address in the field, press the Clear button

once to delete the incorrect IP address.

For example:

To enter in the IP address of 10.224.40.57, type 10, and then press the Next button. Type 222. There is no

need to press the Next button because the cursor automatically moves to the next field of the IP address.

Type 40, and then press the Next button. Type 57, and then press the Exit button.

Enter the Default Gateway, Subnet Mask.

Change

Settings.

Xerox WorkCentre M123/M128/133

Xerox WorkCentre Pro 123/128/133

Quick Network Setup (Static IP)