ALDEN S.S.C. HD A module Manual de instalación y uso - Página 5
Navegue en línea o descargue pdf Manual de instalación y uso para Receptor ALDEN S.S.C. HD A module. ALDEN S.S.C. HD A module 13 páginas. For automatic satellite systems
Imprimir página
LNB IN
OUT TO
RC
14/18V 300mA
DEMO
1
2
3
N° : description
1 : RC
2 : LNB in
3 : Out to demo
4 : Data
5 : USB
6: MOTOR
7: CONTACT
8 : TV OUT
9 : 10-15V DC
Warning - Reminder :
• The system must be in a vertical position in a well ventilated space.
• Do not place the unit near a source of heat or humidity.
• Do not leave the unit direclty in the sunlight.
• The ventilation grille must be free. Do not block.
• Do not use existing coaxial circuits. The quality of the picture can be affected. Each link will weaken the
signal. Cables of a different type can also change the quality of the picture.
• In all cases :
- A direct wiring (no links) with a 5A fuse must go from the unit to the battery for the + wire.
- A direct wiring (no links) must go from the unit to the battery for the - wire.
- A direct wiring (no links) with a 3A fuse must go from the S.S.C. module to the + after ignition
located on the ignition key or on the fuse module.
• When installating with existing wiring, make sure the 3 cases above are respected.
• Always use the provided cables
• The warranty will no longer be applicable if these instructions are not followed.
S.S.C. wiring diagram
MOTOR SKEW
DATA
4
6
Type of connection
Optionnel: Interface utilisateur déportée.
F Type coaxial
F Type coaxial
USB
Power
Spade connector
TV output
Jack DC
S.S.C. HD A Module - Installation and user's guide - 030718 - 5
10 - 15VDC
TV OUT
7
8
9
Input and output description
Connection with the sat-unit's LNB.
Connection used to connect the SSC module to the
receiver or satellite TV.
For Alden's use only
Used to update the data.
Used for the motorisation of the sat-unit.
Folding security system connected to the car
Used to power up a 12V/3A max. TV
12V SSC Power supply
5
ignition.