Xerox DocuMate 510 Manual de instalación - Página 5

Navegue en línea o descargue pdf Manual de instalación para Software Xerox DocuMate 510. Xerox DocuMate 510 20 páginas. Software tools
También para Xerox DocuMate 510: Nota de publicación (23 páginas), Nota de publicación (8 páginas), Manual de formación para clientes (50 páginas)

Introduction

The purpose of this Guide is to provide experienced Systems Administrators with the required

information for setting up a Xerox Wide Format Printer within a variety of network environments.

FreeFlow Accxes Version 12.0 supports the following printers: 510 series, 721P, 6030, 6050,

6204, 8825, 8830, and 8850. Version 12.0 supports the YKE/YKE-N controllers.

Although not all tasks are required for setup within every network environment, the list of typical

communications setup tasks includes:

Printing a printer configuration test print.

Setting up the Printer, including changing the password, installing the help files, and setting the

printer defaults in the Web Print Manager Tool.

Enabling the Scan System to communicate with the FreeFlow Xerox Wide Format Printer.

Installing the drivers.

Installing the Client Tools (ACT) on user workstations, which enables users to send print jobs that

can override the default printer settings.

Installing the Account Management Tool (AMT) on one workstation, from which media usage data

and scanner usage data can be retrieved from the printer's controller.

A working knowledge of your network operating environment.

Appropriate cabling to connect your printer and Scan System to the network.

NOTE: Make sure that the network cabling is compliant with the Ethernet specification for

the environment in which the printer is being installed.

A workstation with the appropriate operating system software installed for that station.

TCP/IP General Setup Requirements: IP Address, Subnet Mask, & Default Gateway:

For small networks — consisting of several network-connected

devices/workstations and a hub. It is necessary to set up the printer with an

individual IP Address and a Subnet Mask (matching the subnet mask being

used by all the other local area network-connected devices). Unless a router

(gateway) is being used to gain access to the larger wide area network, a

Default Gateway address is NOT needed.

For large networks — consisting of many network-connected

devices/workstations, multiple hubs and routers. It is mandatory to set up the

printer with an individual IP Address, Subnet Mask (to match the SUB network

that the printer is on), and Default Gateway address (the router address that

the printer will use to gain access to the larger, wide area network).

FreeFlow Accxes Printer System and Web Print Management Tool Setup Guide