Xerox DocuPrint 100MX Manual de seguridad - Página 30
Navegue en línea o descargue pdf Manual de seguridad para Software Xerox DocuPrint 100MX. Xerox DocuPrint 100MX 38 páginas. Freeflow print server micr user guide
También para Xerox DocuPrint 100MX: Folleto (4 páginas), Especificaciones (2 páginas), Manual del usuario (40 páginas), Manual de instalación (2 páginas), Manual del usuario (32 páginas)
Imprimir página
Using an Existing Signed Certificate from a Certificate Authority
26
NOTE: During steps 2-5, the user may go back and correct any
mistakes made in previous steps.
–
Click on the 'Enable SSL/TLS' checkbox at the top of the SSL/
TLS window.
–
Select a SSL/TLS mode of operation:
•
Normal (Encrypted and Unencrypted Access)
•
Secure (Encrypted Access Only)
–
Select encryption strength:
•
Normal (DES-MD5-56-bit)
•
Normal (DES-MD5-40-bit)
•
Normal (DES-MD5-128-bit)
•
Normal (3DES-MD5-128bit)
•
High (RC4-MD5-128-bit)
•
High (3DES-MD5-128-bit)
–
If SSL/TLS is not already enabled
–
Click 'Add Certificate'
Step 1 - Select "Signed Certificate from a Certificate Authority"
Step 2 - Select and enter either the server
•
Domain Name
•
IP Address
•
Other
Step 3 - Enter the requested information:
•
Organization (required)
•
Organizational Unit (optional)
•
E-mail (optional)
•
Locality (optional)
•
State/Province (optional)
•
Country (required)
Step 4 - Browse to the location of the signed certificate (.pem
file).
Step 5 - Verify information entered in previous steps.
Step 6 - A message will appear indicating that the certificate
has been installed.
NOTE: During steps 2-5, the user may go back and correct any
mistakes made in previous steps.
Security Guide