Xerox Nuvera 100 Manual de planificación - Página 34

Navegue en línea o descargue pdf Manual de planificación para Software Xerox Nuvera 100. Xerox Nuvera 100 38 páginas. Production system
También para Xerox Nuvera 100: Hoja de especificaciones (2 páginas), Características Manual (34 páginas), Manual de planificación (22 páginas), Manual del usuario (40 páginas), Manual de instrucciones (34 páginas), Manual de referencia (2 páginas), Manual de planificación (20 páginas), Manual de referencia (42 páginas), Referencia rápida (2 páginas), Manual de instalación (2 páginas), Manual complementario (48 páginas), Manual de planificación (16 páginas), Manual de referencia (2 páginas), Especificaciones (2 páginas), Manual de consejos y sugerencias (18 páginas), Manual de consejos y sugerencias (18 páginas), Manual de introducción (26 páginas), Manual de introducción (30 páginas)

Imprimir página
Xerox Nuvera 100 Manual de planificación
C.P. Bourg Document Finisher (BDFx)

Limitations

System Dependencies and Prerequisites

•
A Finisher Transport Module is required for in-line
connectivity to the printer.
•
A slight Cover Feeder feed mechanism adjustment may be
necessary when changing cover weights (lightweight stocks
may require a more precise adjustment).
•
For 11" x 17" / A3 simplex single fold only documents, paper
weight greater than 20 lb (80 gsm) are recommended.
•
For 8.5" x 11" / A4 simplex single fold only documents, the
N-1 face up orientation is required.
•
Currently coated stock is not recommended.
•
The BDFx can only be guaranteed to work to its maximum
book thickness when feeding (8.5 x 11 / A4) paper if the
paperweight is 90 gsm or less. (Long grain paper with a
weight above 90 gsm should be tested with the customer
paper and application before selling the BDFx.)
•
Use of short grain paper is highly recommended for 11 x 17"
/ A3 sized paper.
•
The Finisher Transport Module is required for in-line
connectivity to the printer.
•
Currently, a Xerox Document Stacker 5000 must be installed
in-line with the printer and the BDFx.
•
If there is a transition of an existing BCFx to a Nuvera Digital
Production System, an upgrade is needed.
Note: In case the floor at the customer site is very uneven, it is
recommended that the Nuvera IOT is installed and leveled with a
Caster Leveling Kit (kit number 498K07900).
6-2