Xerox Phaser 6100 Primeros pasos - Página 22

Navegue en línea o descargue pdf Primeros pasos para Software Xerox Phaser 6100. Xerox Phaser 6100 28 páginas. Color laser printer
También para Xerox Phaser 6100: Manual (11 páginas), Manual de instalación (2 páginas), Manual de consulta rápida (8 páginas), Manual de instrucciones (10 páginas)

DOCUSP 3.6.xx

Procedure for backing up and restoring resources

3-2

This procedure requires root access to the DocuSP controller so

that the necessary permissions are available to restore the

resources.

Note: For these instructions, it is assumed that you have some

working knowledge of the UNIX operating system.

The RBR script file is available in the /opt/XRXnps/bin directory

of your installed DocuSP 3.6 controller.

1. Open a Terminal window.

2. Enter su.

3. Enter the root password for your system.

4. Change to the directory containing the script.

cd /opt/XRXnps/bin

5. Ensure that the executable permission is assigned by

following this procedure:

a. Enter ls –l.

b. If x permission is not assigned, enter – chmod +x RBR.

6. Start the script by entering ./RBR.

7. Follow the instructions as they appear on screen to complete

the resource backup procedure.

If you are backing up a large amount of resources, you can

monitor the progress of the backup by opening an additional

Terminal window and entering:

tail –f /var/spool/XRXnps/log/Resource_BandR.log

If you are backing up the resources to tape, you need to

know the device ID of the tape drive. There are several

ways to verify the ID and operability of your tape drive.

If you have only one tape drive, the ID is usually 0.

If you have two tape drives, each drive is assigned an ID

starting with 0.

You should use the mt command to check the operation

of your tape before beginning. Following are some

examples of the mt command.

mt –f /dev/rmt/0 status

mt –f /dev/rmt/0 rewind

mt –f /dev/rmt/0 erase

XEROX DOCUMENT SERVICES PLATFORM SERIES

GETTING STARTED