Xerox Phaser 7750DXF Manual del usuario - Página 22

Navegue en línea o descargue pdf Manual del usuario para Software Xerox Phaser 7750DXF. Xerox Phaser 7750DXF 35 páginas. Xerox phaser 7750: supplementary guide
También para Xerox Phaser 7750DXF: Especificaciones (4 páginas), Manual del usuario (4 páginas), Especificaciones (2 páginas), Manual complementario (5 páginas), Manuallines (5 páginas), Manual complementario (2 páginas)

Editing Custom

TekColor Corrections

Editing Custom TekColor Corrections Overview

Use Edit Profile to make minor color changes in a PhaserMatch custom Device Link Profile.

The edited version of the device link profile will become a custom TekColor correction once it

is downloaded to the printer.

To begin editing:

Launch the PhaserMatch application.

Click on the Edit Profile button in the main screen.

Note:

See

Creating Device Link Profiles

profiles.

You can either use the default preview image or select a different CMYK or RGB tiff

image.

Note:

The preview image is used in the editing screen to show the changes you are

making to the color correction being edited.

After selecting a device link profile and a preview image, continue the process of generating a

new custom TekColor correction by clicking the Next button. After you are done with each

subsequent editing step in this process, click the Next button to have PhaserMatch walk you

through the steps needed to create custom TekColor corrections.

Editing is best done in a series of small steps. While editing, you can make a small change and

print the results. Then continue by repeating this operation until you get the desired results.

Finally after making incremental changes, if the results are satisfactory, click the Next button

in the application to save the results and create a new custom TekColor correction. If the

results do not meet your needs, click the Close button in the edit window and start again.

on page 3-1 for information about device link

PhaserMatch and PhaserCal 4.0 User Guide

5-1