Xerox 6180DN - Phaser Color Laser Printer Manual de instalación - Página 14

Navegue en línea o descargue pdf Manual de instalación para Servidor de impresión Xerox 6180DN - Phaser Color Laser Printer. Xerox 6180DN - Phaser Color Laser Printer 34 páginas. 26-ppm monochrome/ 20-ppm color
También para Xerox 6180DN - Phaser Color Laser Printer: Hoja de especificaciones (2 páginas), Manual del usuario (32 páginas), Manual del usuario (28 páginas), Manual de instalación (2 páginas), Manual de seguridad (38 páginas), Nota de publicación (2 páginas), Manual de instalación (2 páginas), Manual de introducción (37 páginas), Manual (34 páginas), Manual (34 páginas), Manual de introducción (34 páginas), Manual del usuario (32 páginas), Manual de instalación y funcionamiento (8 páginas), Especificaciones (4 páginas), Manual (28 páginas)

Imprimir página

Xerox 6180DN - Phaser Color Laser Printer Manual de instalación

FREEFLOW PRINT SERVER 6.0.xx

your customer's company. The customer network administrator

assigns IP address numbers within this set to each host and

workstation on the network.

Subnets: A "YES" answer to this query indicates that your

customer's network is divided into segments or "subnets." In this

instance the following data element, subnet mask, must also be

provided.

Subnet Mask: The subnet mask is a decimal or hexadecimal

group of four fields, each separated by a decimal point that

indicates how much of the IP Address is used with the Network

number to create subnets. The following is an example of a

subnet mask in its decimal and hexadecimal form.

255.255.0.0 = 0xff.0xff.0x0.0x0

The subnet mask is derived by the network administrator

according to how many subnets are needed. The subnet mask

is the same for all hosts that exist on a given network. Your

customer's network administrator can provide this information.

Ipv6: Internet protocol version 6. FreeFlow Print Server is not

using this version of the Internet protocol at this time. Do not

select this option.

Default Router lP address: The default router IP address is a

unique 4 byte, 32 bit numeric value, for example, 13.252.12.198

that identifies the machine that is acting as the main router. The

router maintains tables of addresses of many networks in order

to forward data packets between these networks. During install,

the service representative creates a default router file on the

print server, if one does not already exist, and this number is

added to a line in the new file. Your customer's network

administrator should provide this number.

NOTE: If another machine is not identified as the default router,

the print server will automatically take over the main router

function. This may noticeably slow down processing on the

network.

Kerberos Security: Kerberos security is a network

authentication protocol that is provided with the Solaris

environment. FreeFlow Print Server does not currently support

this protocol.

Name Service: DNS, NIS, NIS+, and LDAP are network

information services that hold user information. None indicates

that the user information is held locally. Additional information

for each of these services should be entered in the appropriate

table in W-6. The network services are enabled and configured

using the FreeFlow Print Server Network Configuration screens.

NOTE: In order to load and enable Remote Services, DNS must

be the Name Service type.

Geographic Region: Enter your customer's geographical

country or region. The selections available are Africa, Western

GETTING READY FOR THE PRINT SERVER INSTALLATION

XEROX FREEFLOW PRINT SERVER