Xerox DocuColor 8000AP Manual - Página 6

Navegue en línea o descargue pdf Manual para Servidor de impresión Xerox DocuColor 8000AP. Xerox DocuColor 8000AP 13 páginas. European harmonic current notice
También para Xerox DocuColor 8000AP: Manual de inicio rápido (26 páginas), Boletín informativo (1 páginas), Notas de publicación (36 páginas), Aviso (1 páginas)

Imprimir página

and 12 pt. and 14 pt. papers should be run in the 221 – 300 gsm range. Since many materials over

14 pts. of thickness will exceed the image transfer and feeding / transport capabilities of the

DocuColor 8000AP / 8000 / 7000AP / 7000 print engine, it is recommended to purchase small

quantities to ensure your expectations are met, prior to committing to large runs.

C1S papers are commonly used in high-quality applications with high toner coverage on the coated

side. Image quality on the coated side will be very good; however, due to the inherent properties of

the paper, the second side will exhibit very different print quality. If superior image quality is required

for both sides, Xerox Digital Color Elite / Select Gloss and Silk (C2S) products are recommended.

Do c u Ca r d s

A DocuCard is a 7 mil (7/1000 inch) card affixed to a letter size (8.5"x11" or A4) carrier sheet, usually

a 90 lb. Index stock, 60# Cover stock or an 80# Text stock. The card is generally adhered to an

embossed area at the bottom of the carrier sheet.

DocuCards should be run in batches of 50 sheets. If more than 50 sheets are loaded at a time, the

stack may tilt or tip which may lead to an increase in misfeeds and feeding faults. Additional cards

(up to 200) can be fed short edge first if a Tiltatron is installed. Tiltatrons can be purchased via

Customized Application Services at 585-227-5414. Currently, 1-up and 2-up configurations are

supported, as well as some customized applications. For more information contact your Xerox Supply

Account Manager.

Do c u M a g n e t s

DocuMagnet is a unique application consisting of a 12 mil, 2.125" x 3.375" magnetized ID card

integrated into an 8.5" x 11" carrier sheet specifically designed for use in some DocuColor

equipment.

DocuMagnets should be run in batches of no more than 50 sheets in the Short Edge Feed orientation

with cards face-up and towards the trailing edge. If more than 50 sheets are loaded at a time, the

stack may tilt or tip which may lead to an increase in misfeeds and feeding faults. Additional cards

(up to 100) can be fed short edge first if a Tiltatron is installed. Tiltatrons can be purchased via

Customized Application Services at 585-227-5414. Duplex printing is not currently recommended.

For best results, avoid printing on the carrier sheet in the area around the card (approximately 3.5"

from the bottom of the sheet).

Du r a Pa p e r (T e s l i n ®-l i k e M a t e r i a l s )

DuraPaper and other Teslin-like materials are synthetic single layer sheets that print and feel like

paper yet are durable and waterproof like plastic. They usually have some tear and abrasion

resistance, making them an ideal printing choice for demanding uses such as tags, menus, labels

and other "harsh environment" applications. They also offer excellent bond strength with laminating

film.

Customers can run DuraPaper and other Teslin-like materials from any tray. The recommended

weight setting is 221-300 gsm for optimum transfer and fusing. In this weight range, automatic

For more information on Genuine Xerox Supplies, call 1-800-822-2200 in the USA and 1800-668-0133 in Canada