Xerox FreeFlow Nota de publicación - Página 13

Navegue en línea o descargue pdf Nota de publicación para Servidor de impresión Xerox FreeFlow. Xerox FreeFlow 33 páginas. For color 560/570 printer
También para Xerox FreeFlow: Manual de instalación (34 páginas), Folleto (2 páginas), Nota de publicación (23 páginas), Manual de instalación (2 páginas), Manual de seguridad (38 páginas), Información importante sobre la instalación (2 páginas), Manual del usuario (50 páginas), Manual (18 páginas), Manual de conexión rápida (2 páginas), Manual de procedimientos del transportista (28 páginas)

Xerox FreeFlow Nota de publicación

7.6 Support for 30 inch roll on 6030/6050 printer

Support of 30 inch rolls on the 6030/6050 printer changed for version 3.2.00. Version 10.1 of
AccXES supports 3.2.00 version of 6030/6050 printer and later. See you local Service
Representative for proper installation and configuration of the 3.2.00 printer firmware.

7.7 Disk Image Overwrite

The main feature for this release is the security feature, disk image overwrite. This feature
provides a means to securely overwrite the entire hard drive, or setup the system to securely
overwrite image data when it is no longer needed, i.e. the job has printed. Details of this feature
can be found in the "Release Notes" section of this document.

7.8 Scan to FTP

This feature allows users to scan documents to one of four FTP destinations. The destinations
MUST be setup by the system administrator. See the "Release Notes" section of this document
for more details.

7.9 Maximum Copy Length

This feature allows the user to specify the maximum output length of a copy. The maximum
length can be changed via the scanner UI in the following location:
MENU>CONFIGURATION>COPY OPTIONS>IMAGING>MAXIMUM COPY LENGTH
NOTE: The maximum copy length defaults to the maximum length that the attached printer
can print. For the 8825, 8830, 8850, and 510 Series this value is 1200 inches. For the 721P
this is either 6 meters or 16 meters based on the configuration of the printer. For the 6030
and 6050 this value defaults to 3 meters.
Page 13