Xerox Nuvera 100 Manual complementario - Página 42

Navegue en línea o descargue pdf Manual complementario para Servidor de impresión Xerox Nuvera 100. Xerox Nuvera 100 48 páginas. Production system
También para Xerox Nuvera 100: Hoja de especificaciones (2 páginas), Características Manual (34 páginas), Manual de planificación (22 páginas), Manual del usuario (40 páginas), Manual de instrucciones (34 páginas), Manual de referencia (2 páginas), Manual de planificación (20 páginas), Manual de referencia (42 páginas), Referencia rápida (2 páginas), Manual de instalación (2 páginas), Manual de planificación (38 páginas), Manual de planificación (16 páginas), Manual de referencia (2 páginas), Especificaciones (2 páginas), Manual de consejos y sugerencias (18 páginas), Manual de consejos y sugerencias (18 páginas), Manual de introducción (26 páginas), Manual de introducción (30 páginas)

Managing the Tape Client

Managing the tape drive

Renaming a tape

drive

3-4

In the Input Device group box on the Tape Client window, you

can initiate the following tasks to manage the tape drive from

which you are sending jobs.

If you have more than one tape drive connected to your printer,

you must select the drive that you want to use to send the job.

When the printing system is installed and your tape drives are

configured on it, the system names them "Tape 0," "Tape 1," etc.

If you want to assign a different name to a tape drive, follow

these steps:

1. On the Tape Client window, select the drive that you want to

rename from the Device menu.

2. Click Rename.... The Rename Device window opens,

displaying in the Old Name field the name of the drive that

you selected.

Figure 3-3. Rename Device window

3. In the New Name text field, enter the name you want to give

the tape drive.

4. Click OK. The Rename Device window closes, and the new

drive name is displayed on the Device menu.

NOTE: The renaming of the tape drive applies to the Tape Client

window, not to the DocuSP window.

Tape Client Job Submission Guide