Xerox Phaser 6100DN Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Servidor de impresión Xerox Phaser 6100DN. Xerox Phaser 6100DN 32 páginas. Disk overwrite installation and usage
También para Xerox Phaser 6100DN: Manual de instalación (34 páginas), Especificaciones (2 páginas), Folleto y especificaciones (4 páginas), Manual del usuario (28 páginas), Manual de instalación (2 páginas), Manual de seguridad (38 páginas), Manual de instalación (2 páginas), Nota de publicación (2 páginas), Manual de introducción (37 páginas), Manual (34 páginas), Manual (34 páginas), Manual de introducción (34 páginas), Manual del usuario (32 páginas), Manual de instalación y funcionamiento (8 páginas)

How can I customize application preferences?

Customize settings for data capture and transfer

•

Automatic Synchronization with Xerox Support Server

is enabled by default.

•

You can enter or edit the Print Engine Serial Number.

NOTE: Changing the serial number is not recommended, and

should only be performed in special cases by the CSE or if

Xerox specifically asks for the change to occur.

3. Click [Apply New Settings].

Or, click Restore Settings if you do not want to modify the

capture settings and you want to restore the settings that were

saved last.

The [Problem Reporting: Settings] page has an option that you

can select to automatically delete captured data after it is

transferred.

To specify settings for captured files

1. Select [Home: Problem Reporting: Settings].

2. Select the Capture tab.

3. If you want to delete the captured files from your system after

they are transferred to Xerox, check the [Remove Capture

Data after Transfer] checkbox. This eliminates the redundant

storage of the files on your system. Or if you want to save the

captured files clear the checkbox.

4. Enable Job Data Capture is enabled by default. If the

selection box is not marked, the Job and Machine & Job data

types cannot be selected on the Capture or Capture &

Transfer pages. To disable this feature, remove the mark from

the checkbox.

5. Note the directory location of the captured files. This field is

read-only. You can verify this location when you select files to

transfer to Xerox.

6. Click [Apply New Settings] to save the settings.

Or, click [Restore Settings] if you do not want to modify the

capture settings and you want to restore the settings that were

saved last.

To specify options for transferring data files

1. Select [Home: Problem Reporting: Settings].

2. Select the Transfer tab.

User Guide