Xerox Phaser 6100DN Manual - Página 8

Navegue en línea o descargue pdf Manual para Servidor de impresión Xerox Phaser 6100DN. Xerox Phaser 6100DN 34 páginas. Disk overwrite installation and usage
También para Xerox Phaser 6100DN: Manual de instalación (34 páginas), Especificaciones (2 páginas), Manual del usuario (32 páginas), Folleto y especificaciones (4 páginas), Manual del usuario (28 páginas), Manual de instalación (2 páginas), Manual de seguridad (38 páginas), Manual de instalación (2 páginas), Nota de publicación (2 páginas), Manual de introducción (37 páginas), Manual (34 páginas), Manual de introducción (34 páginas), Manual del usuario (32 páginas), Manual de instalación y funcionamiento (8 páginas)

Imposition/Layout enhancements

DocuSP 4.2 provides the user with a new template, the

Z-sort template. In addition, the Z-sort, or ZIP-sort

capability has been extended to all multiple-up options.

This addition allows multiple-up (e.g. 4-up, 6-up, 9-up,

etc.) to be cut and then stacked in a predefined order

so that postal sort order is maintained. See the figure

below.

Detail shot of new Cut and Stack control in the Layout FAB

The output may be either single-sided or double-sided,

and the layout numbers, as is suggested by the layout

example shown above, the pages and images

appropriately so that the order is maintained when cut

and stacked.

As a specific example of N-up imposition, consider the

2-Up case. 2-Up Flip right can be programmed by

selecting "Repeated" and by checking the "Flip Right"

box. In a similar fashion, the legacy 2-Up Cut and

Stack option can be programmed by selecting "Cut and

Stack" and checking the "Cut On Binding Edge" box.

DocuSP 3.8 and 4.0 to 4.1 Differences Document