Direct Supply Maxwell Thomas Athens Manual del usuario - Página 6
Navegue en línea o descargue pdf Manual del usuario para Mobiliario interior Direct Supply Maxwell Thomas Athens. Direct Supply Maxwell Thomas Athens 12 páginas. Dining table
Imprimir páginaAssembly Instructions – Pedestal Bases
• WARNING: Unpack the table in an area with sufficient room to work. Do not allow residents
near the product until it has been completely set up and the work area has been cleared of
all debris. Inspect the product for damage. If the product is damaged or the wrong product
was accidentally sent, DO NOT USE IT, and immediately contact Direct Supply Equipment &
Furnishings for further instruction.
Spider
Inner Column
Adjustment
Knob
Outer Column
Figure 1
Tools Needed (not included)
• 11/16" Wrench and/or socket
• Pliers and/or locking pliers
• Phillips-head screwdriver
• Power drill and Phillips bit
6
1. Carefully open packaging and remove
tabletop. Place tabletop upside down on a
soft surface to avoid damage to surface.
NOTE: Skip to Step 7 if your Maxwell
Thomas table base, column and spider are
pre-assembled.
2. Gather the base plate, column, spider, nut
and bolt to begin assembling the table
base (Figure 1).
3. Insert the bolt through the spider, then
the column and finally the base. The
spider must be oriented concave side up
(Figure 1).
4. Screw the nut onto the bolt underneath
the base plate (Figure 1).
5. Place the base on the ground and align
the four longer arms of the spider with
the four legs on the base plate (Figure 1).
Figure 2