Yamaha 501 Manual del usuario - Página 17

Navegue en línea o descargue pdf Manual del usuario para Instrumentos musicales Yamaha 501. Yamaha 501 24 páginas. Internet connection guide (version 1.10)
También para Yamaha 501: Manual del usuario (20 páginas), Manual de instalación (32 páginas), Manual de conexión (22 páginas)

Imprimir página
Yamaha 501 Manual del usuario

CD SYNCHRONIZED RECORDING

This unit can make a tape deck's recording synchronized with CD play automatically. With this function, you can record a CD on
tape very easily and more precisely.
This recording method needs a YAMAHA tape deck compatible with this function. (Refer to the tape deck's operation manual to
know whether it is compatible or not.)
* This unit and the tape deck must be placed close to each other so that both of them can receive the signals from this unit's
remote control transmitter at the same time.
CDC-901
OPEN/CLOSE
PROG
1
4
7
1
DISC SKIP
4
SKIP
SEARCH
3
1
Select the disc.
2
Load a tape on the tape deck.
CDC-901 only
*
The peak level searching function of this unit is useful
for adjusting recording level on the tape deck. (Refer
to page 21.)
3
This unit enters into the pause mode, and the tape deck
enters into the REC/PAUSE mode.
*
In this mode, the time display on this unit flashes on
and off.
TIME
DIMMER
TAPE
REPEAT
RANDOM
2
3
MODE
+
4
5
6
10
8
9
0
DISC
SCAN
PAUSE
PLAY
5
INDEX
STOP
+
–
OUTPUT LEVEL
SYNCHRO
DISC SKIP
SYNCHRO
CDC-501
OPEN/CLOSE
PROG
1
4
7
1
DISC SKIP
SKIP
4
SEARCH
3
4
If desired, select the track to be recorded first.
5
5
Both CD play and tape deck recording begin.
* CD play begins a little later than recording.
6
If you want to stop recording temporarily and restart
recording from a desired track, follow steps 3–5 again.
To cancel this function
Press the STOP button.
Notes
•
To finish or stop the recording, press the "STOP" button on
the tape deck.
•
Programmed sequence of tracks can also be recorded with
this function, instead of recording an entire disc. (Refer to
page 14–15 for the programming procedure.)
CDC-901 only
•
This function can also be used together with the automatic
tape-programming function. (Refer to page 18–20.)
DIMMER
TIME
CLEAR
REPEAT
RANDOM
2
3
MODE
+
5
6
10
4
8
9
0
DISC
SCAN
PAUSE
PLAY
5
INDEX
STOP
SYNCHRO
SKIP
or
PLAY
17