aerauliqa QR590E Manual de instalación - Página 11
Navegue en línea o descargue pdf Manual de instalación para Ventilador aerauliqa QR590E. aerauliqa QR590E 20 páginas. Energy recovery ventilation unit with enthalpic heat exchanger
Imprimir página
User menu
1 Mode Selection
2 Boost
3 Boost Duration
4 Reset FILTER Alarm
5 Night Mode
6 Installer menu
User menu
1 Mode Selection
2 Boost
3 Boost Duration
4 Reset FILTER Alarm
5 Night Mode
6 Installer menu
7.2 Installer Menu on CTRL-DSP
The Installer menu can be selected either by selecting point 6) in the User menu or by holding OK+ESC for about 7 seconds.
To exit the installer menu press ESC or wait for about 60 seconds.
Installer menu
1 Language
2 Date/Time
3 Machine orientation
4 Bypass settings
5 Heating
6 Heating Threshold
7 Dehumidification
8 Speed Setting
9 Airflow Balancing
10 F7 filter
11 Filter Alarm interval
12 Working Hours Counter
13 Save settings
14 Load settings
15 Restore Default Settings
16 Contrast
17 Debug page
Installer menu
1 Language
2 Date/Time
3 Machine orientation
4 Bypass settings
5 Heating
Installer menu
1 Language
2 Date/Time
3 Machine orientation
4 Bypass settings
5 Heating
It allows to deactivate the automatic operation of the speed increased via sensors during
nocturnal hours.
It operates from 8:00 p.m. to 8:00 a.m (fixed period of time). The sensors have no effect
and the unit runs at the selected continuous speed.
OFF is flashing: use or to chance to ON.
Press OK to select.
The factory setting (DEFAULT) is OFF.
It allows to select the Installer menu.
Enter
installer menu?
Press OK to enter the Installer menu.
Press ESC to go back to the previous menu.
Use or to select the menu.
NOTE:
Menu 6 "Heating Threshold" displays only if Menu 5 "Heating" is set on PRE or POST.
It allows to select the language among English, Italiano, Nederlands, Français, Deutsch,
Espanol.
Press OK to enter.
Language is flashing: use or to choose.
Press OK to select.
The factory setting (DEFAULT) is English.
It allows to set the date and the time
Press OK to enter.
Use or to choose.
Press OK for setting and again to confirm.
Press ESC to go back to the previous menu.
11