Yamaha disklavier Mark III Series Manual de funcionamiento avanzado - Página 37
Navegue en línea o descargue pdf Manual de funcionamiento avanzado para Instrumentos musicales Yamaha disklavier Mark III Series. Yamaha disklavier Mark III Series 39 páginas. Playback models
También para Yamaha disklavier Mark III Series: Manual de mantenimiento (50 páginas), Folleto y especificaciones (20 páginas), Manual de instrucciones (49 páginas)
Imprimir página
7
Start playing your song with the
left- and right-hand parts and the
pedal part simultaneously.
As soon as you play the keyboard or press a
pedal, recording will start.
8
When you finish playing your
song, press [STOP].
When [STOP] is pressed, the following
display appears.
The following table gives a description of
each of the options.
Option
Description
SAVE
The new recording is saved
under the current song number.
NEW
The new recording is saved
under a new song number. The
existing song is kept under the
current song number.
CANCEL
The new recording is
discarded. The existing song is
kept under the current song
number.
9
Use [<] and [>] to select an
option, then press [ENTER].
The re-recording is saved as indicated or
canceled.
Re-Recording One Part
1
Specify a disk.
2
Press [REC].
The REC indicator lights and the
PLAY/PAUSE indicator flashes.
3
Use the [SONG SELECT] buttons to
select the L/R song that you want
to re-record.
Both PART indicators light green.
4
Use the [PART] buttons to select
the part that you want to re-
record.
The PART indicator of the selected part
lights red.
5
Press [REC] until the following
display appears.
There are two options available on this
display: Pedal Record on/off and Monitor
Piano on/off.
Parameter
Option
OFF
Pedal
ON
Record
OFF
Monitor
Piano
ON
Notes
The existing pedal data
is kept.
New pedal data is
recorded, replacing the
existing data.
While one piano part is
being re-recorded, the
other part is not played
back by the piano.
While one piano part is
being re-recorded, the
other part is played
back.
33