Yamaha DM 2000 Version 2 Manual complementario - Página 3

Navegue en línea o descargue pdf Manual complementario para Instrumentos musicales Yamaha DM 2000 Version 2. Yamaha DM 2000 Version 2 4 páginas. Version 2
También para Yamaha DM 2000 Version 2: Manual del usuario (44 páginas), Manual de instalación (28 páginas), Manual de instalación (14 páginas), Manual de instalación (22 páginas), Manual de instalación del software (13 páginas), Manual del usuario (1 páginas), Manual del usuario (37 páginas), Manual de instalación (35 páginas), Manual de orientación (8 páginas), Manual de redundancia (8 páginas), Manual del usuario (3 páginas), (alemán) Manual de instalación del sistema operativo (13 páginas)

Imprimir página
Yamaha DM 2000 Version 2 Manual complementario
Dimmer & Talkback Control via the
CONTROL Port
The Control Room and Surround Monitor Dim-
mers, and the Talkback function can now be con-
trolled remotely via the CONTROL port.
Each time the GPI0 input (pin 22) goes Low
(ground), Talkback is turned on or off. Each time the
GPI1 input (pin 10) goes Low (ground), the Dim-
mer is turned on or off.
Solo to Studio Out
With the new Solo Bus to Studio Out preference on
the Preferences 1 page, which can be selected by
using the DISPLAY ACCESS [SETUP] button,
soloed channels can now be monitored through the
STUDIO MONITOR OUT.
When the Solo Bus to Studio Out preference is on,
and all the STUDIO signal source buttons in the
MONITOR section are off (i.e., [CONTROL
ROOM], [STEREO], [AUX 11], and [AUX 12]), the
Solo signal is output by the STUDIO MONITOR
OUT when channels are soloed.
User Defined Keys
The following items have been added to the list of
functions that can be assigned to the USER
DEFINED KEYS.
#
Function
161
Surr Lib. Recall +1
162
Surr Lib. Recall –1
163
Surr Lib. Recall No. XX
Functions are assigned to the USER DEFINED KEYS
on the USER DEFINED KEY ASSIGN page, which is
selected by using the USER DEFINED KEYS [DIS-
PLAY] button.
In addition, the following initial assignments of
USER DEFINED KEYS Bank A have changed.
#
Bank A
1
SOLO ON
—>
2
No Assign
—>
3
No Assign
—>
Display
Surr Lib+1 RCL
Surr Lib–1 RCL
Surr LibXX RCL
#
Bank A
1
Surr Lib 0 RCL
2
Surr Lib –1 RCL
3
Surr Lib +1 RCL
3