Yamaha TP-3129 Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Instrumentos musicales Yamaha TP-3129. Yamaha TP-3129 11 páginas. Pedal timpani tp100 e serie
También para Yamaha TP-3129: Manual del usuario (6 páginas)

Imprimir página

Initial Preparation

Your Yamaha timpani is equipped with a plastic head carefully mounted and adjusted at the factory.

However, new heads tend to stretch during shipping and storage, so it may be necessary to re-tune the

instrument before using. Please perform the following steps to check and, if necessary, readjust your

instrument.

The area between the kettle edge and the inner

circle of the counter hoop is called the collar.

Please make sure that the width of this collar is

uniform, as shown in the illustration titled "Cor-

rect".

Correct

Kettle

edge

Collar

If the collar is not uniform (illustration titled

"Wrong"), keep the heel of the pedal fully de-

pressed as shown in Fig. C, and align the head

and hoop as shown in the illustration titled "Cor-

rect".

Make sure that the end of the wire tube is not

disengaged from the adjuster of the tuning indi-

cator as shown in Fig. A. If it is disengaged, in-

sert it into the adjuster as shown in Fig. B.

Fig. B

Wrong

Kettle

Counter

edge

hoop

Collar

Adjuster

Wire tube

Fig. A

If the heel of the pedal is fully lowered as in Fig.

C, proceed with step

If the pedal position is as shown in Fig. D or the

toe of the pedal is fully lowered, perform step

first.

Fig. C

Counter

hoop

Fig. D

Caution

Never place your fingers or foot into the mov-

ing parts or the space under the pedal or base.

Serious injury can result if fingers or feet be-

come pinched.

Fully depress the heel of the pedal as shown in

Fig. C. Hold the pedal in this position, as it will

return otherwise.