Yamaha YDP-101 Manual del usuario - Página 19

Navegue en línea o descargue pdf Manual del usuario para Instrumentos musicales Yamaha YDP-101. Yamaha YDP-101 48 páginas. Yamaha digital piano owner's manual
También para Yamaha YDP-101: (Spanish) Manual De Instrucciones (47 páginas)

Imprimir página
Yamaha YDP-101 Manual del usuario

Tuning

Tuning makes it possible to adjust the pitch of the YDP-101 over a 427.0 Hz
... 453.0 Hz (corresponding to the A3 note's Hz) range in approximately 0.2
Hertz intervals. Pitch control is useful for tuning the YDP-101 to match other
instruments or recorded music.
A
B
C
-1
-1
3
SONG
SELECT
+
– /NO
/YES
A#
-1
C
3
A
-1
SONG
SELECT
+
– /NO
/YES
A#
-1
C
A
-1
B
-1
3

Tuning Up

B
3
Z
To tune up (raise pitch), hold the A-1 and B-1 keys simultaneously.
X
Press any key between C3 and B3. Each time a key in this range is
pressed the pitch is increased by approximately 0.2 Hz.
The [–/NO] and [+/YES] buttons can also be used to tune down or up,
respectively, in approximately 1 Hz decrements/increments. Press the
[–/NO] and [+/YES] buttons simultaneously to recall standard tuning
(A3 = 440 Hz).
C
Release the A-1 and B-1 keys.

Tuning Down

B
3
Z
To tune down (lower pitch), hold the A-1 and A#-1 keys simulta-
neously.
X
Press any key between C3 and B3. Each time a key in this range is
pressed the pitch is decreased by approximately 0.2 Hz.
The [–/NO] and [+/YES] buttons can also be used to tune down or up,
respectively, in approximately 1 Hz decrements/increments. Press the
[–/NO] and [+/YES] buttons simultaneously to recall standard tuning
(A3 = 440 Hz).
C
Release the A-1 and A#-1 keys.

To Restore Standard Pitch

B
3
Z
To restore the default pitch (A3 = 440 Hz), hold the A-1, A#-1 and
B-1 keys simultaneously.
X
Press any key between C3 and B3.
C
Release the A-1, A#-1 and B-1 keys.
In terms of "Hertz", the overall tuning range is from 427.0 Hz to 453.0
Hz. The current tuning setting is shown on the LED display while the tuning
is being adjusted. Tenths of a Hertz are indicated on the LED display by the
appearance and position of one or two dots, as in the following example:
Display
440
4. 4 0
44. 0
440.
4. 4 0.
• An alternative tuning method is available in the Function mode — page 25.
NOTE
...............................................................................................................
.......................................................................................................
...................................................................
Value
440.0
440.2
440.4
440.6
440.8
19
YDP-101