Yamaha YM-6100 Manual del usuario - Página 14

Navegue en línea o descargue pdf Manual del usuario para Instrumentos musicales Yamaha YM-6100. Yamaha YM-6100 17 páginas. Concert marimba

Assembly

Lower the long outer rails into place, taking care to

align the metal fittings and guide posts on the un-

derside and sides at the same time.

Metal fitting

Frame end

Treble side

Rail

Guide post

Attach the clamp to the inner and outer rails and

then hook the levers on the resonator section onto

the clamp.

Set the tone bars.

5-1. Set the natural tone bars first.

With one person holding the suspension cord on

the bass side and the other holding the suspension

cord on the treble side securely with both hands,

gently place the tone bars on the rails.

Align each tone bar individually and hook its cord

onto the corresponding post.

5-2. After confirming that the cord is secured to every

post, fix the tone bars by pulling the right and left

cords forward from the large end side and hooking

the two springs into each other.

* When setting the tone bars, use care not to cause

any damage to them.

Bass side

Levers

Clamp

Springs