Yamaha YOB-431 Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Instrumentos musicales Yamaha YOB-431. Yamaha YOB-431 18 páginas. Oboe
También para Yamaha YOB-431: Manual del usuario (21 páginas)

Yamaha YOB-431 Manual del usuario
Assembly and Tuning
Before assembling the instrument, please observe the following:
When holding and assembling the instrument, take care not to apply excessive force to the keys.
Applying excessive force may bend the keys, resulting in unbalanced adjustment.
When you assemble the instrument for the fi rst time, you may have diffi culty connecting the joints
due to tightness. In this case, apply a thin coat of the included cork grease to the joint cork, and try
again to connect the joints. If the joints still do not fi t together smoothly, apply a thin coat of cork
grease to the receiver side as well. When applying cork grease, be careful not to apply too much.
 Assembling the Oboe
1.
Apply cork grease.
Before assembling the oboe, apply a thin coat
of cork grease to the joint cork and around the
lower part of the reed tube.
2.
Attach the bell to the lower joint.
Hold the bell in your left hand and check the
position of the connection keys for the lower
joint and the bell. Slide the bell into the lower
joint.
6
3.
Connect the upper and lower joints.
Hold the lower joint in your left hand and
check the position of the connection keys.
Slide the lower joint into the upper joint.
 Hints on Tuning the Oboe
Th e pitch of an oboe is aff ected by the length and
type of the reed tube, and the length, width, scrape
and gouge of the reed. If you have diffi culty tuning
the oboe, experiment and adjust these elements.
In addition, the temperature in the room and
inside the oboe aff ect the pitch of the instrument.
Before you start to tune, allow the instrument to
adjust to room temperature, or warm the instru-
ment by holding it in your hands.