Yamaha YPR-30 Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Instrumentos musicales Yamaha YPR-30. Yamaha YPR-30 12 páginas. Yamaha portable piano owner's manual
También para Yamaha YPR-30: Manual del usuario (12 páginas), (Francés) Mode D'emploi (12 páginas)

Imprimir página

keier)

ШЇЇ

С. Local Control On/Off

Normally the YPR-30 sounds when you play a passage or a

phrase on the keyboard, or changes tone when you select

a Voice. This intuitively obvious status is called "Local

Control On". However, the YPR-30 can be set to "Local

Control Off" where its keyboard and internal sound module

work independently.

You cannot control the internal sound module from the

keyboard in "Local Control Off". What you play on the

keyboard will be transmitted from the MIDI OUT Jack to a

connected external MIDI instrument which will be controlled

the YPR-30.

Anilarly, the YPR-30's internal sound module can also be

controlled by a separately connected external MIDI device.

»» To set the YPR-30 to Local Control Off,

press the MIDI/TRANSPOSE Button and hold it down. Then

press the Voice Select Button PIANO 1. Repeat the same

operation once again to set the YPR-30 to Local Control

On.

* When the POWER is turned ON, the YPR-30 will be automatically set

to Local Control On.

D. Cancelling the Program

Change Message

The Program Change Message is a kind of MIDI Channel

Information that is for selecting a sound program. Press a

YPR-30 Voice Select Button to transmit a Program Change

Message to an external instrument which is MIDI

connected. It will receive the message and select the sound

program corresponding to the specified number in the

message. It is also possible for an external MIDI device to

select the Voice of the YPR-30 with this message.

The YPR-30 can transmit and/or receive 8 Program

3. MIDI

OMNI ON

Transmitting Channel

Receiving Channel

Change Messages (as many as there are internal Voices).

However, if not required, you can set the YPR-30 to cancel

this message for both transmitting and receiving.

>> To cancel this Program Change Message,

press the MIDI(TRANSPOSE Button and hold it down. Then

press the Voice Select Button PIANO 2. Repeat the same

operation once again and the YPR-30 will transmit and

receive this message.

* The Program Change Message is automatically available when the

POWER is turned ON.

E. Cancelling the Control

Change Message

The Control Change Message is a kind of MIDI Channel

Information for controlling the played sound. The YPR-30

uses this message mainly for transmitting and receiving the

information of Damper Pedal effect by the Foot Switch. This

means that you can add this effect to external MIDI

instruments when the Foot Switch is connected to the YPR-

30 and vice versa.

However, when you wish to cancel this message, do as

follows:

»» To cancel this Control Change message,

press the MIDI(TRANSPOSE Button and hold it down. Then

press the Voice Select Button E.PIANO. Repeat the same

operation once again and the YPR-30 will transmit and

receive this message.

* The Control Change Message is automatically available when the

POWER is turned ON.