Yamaha YV-3910 Manual del usuario - Página 19

Navegue en línea o descargue pdf Manual del usuario para Instrumentos musicales Yamaha YV-3910. Yamaha YV-3910 28 páginas. Concert vibraphones
También para Yamaha YV-3910: Manual del usuario (28 páginas), Manual del usuario (29 páginas), Manual del usuario (34 páginas)

Imprimir página

⁄0

ADJUSTMENTS

10-1 Pedal Stroke Adjustment

Loosen the center rod fixing bolts to adjust the

protruding length of the center rod to the desired

pedal stroke, and retighten the bolts. The recom-

mended stroke (distance between pedal and floor)

is 9/16" to 13/16" (1.5 to 2 cm).

10-2 Wire Clip Adjustment

For shipment the wire clip is initially set at a low position for packing reasons. For

normal use this clip should be adjusted as follows: With the pedal released loosen the

fixing bolt of the wire clip, shift the clip up until distance A in the illustration below is

1/16" to 1/8" (1 to 3 mm), and tighten the wing bold in this position.

The clip also allows setting the instrument to "half sustain damper" (slight continuous

damper effect) or "open damper"* by changing its position accordingly.

To set to "open damper" depress the damper pedal fully to keep the damper open,

and set the wire clip to the highest position to lock the damper.

10-3 Damper Spring Adjustment

The damper effect (its pressing force on the tone bars) and the pedal force can be

increased by turning the spring adjustment wheel counterclockwise.

Spring Adjustment

Wheel

Strong

Center Rod Fixing Bolt

Weak

Wire Clip

ASSEMBLY: YV-3910/3710/3700

Pedal

9/16" ~ 13/16"

(1.5 ~ 2 cm)

Floor

Center Rod

Pedal Stroke Adjustment