Yamaha YVD10 Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Instrumentos musicales Yamaha YVD10. Yamaha YVD10 11 páginas. Vibraphone variable-speed driver
También para Yamaha YVD10: Manual del usuario (11 páginas)

Imprimir página

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or

others, or damage to the units or other property. These precautions include, but are not limited to,

the following:

Handling

• Treating the controller or driver roughly may damage the

internal circuit board, etc.

• Keep small parts out of the reach of infants. Your

children may accidentally swallow them.

• Do not place heavy objects on the units, and do not use

excessive force on the buttons, switches or connectors.

• Never touch the rotating pulleys. Doing so may result in

pinching your fingers, etc.

Assembly

• Assemble the units in the proper sequence by following

the assembly instructions in this manual. Also, make

sure to tighten screws and bolts regularly. Failure to do

so might result in damage to the units or even injury.

• Use the bolts that comes with the vibraphone.

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument.

Always turn the power off when the instrument is not in use.

YVD20 YVD10 Owner's Manual

Transportation and Installation

• Do not place the units in an unstable position where it

might accidentally fall over.

• Before moving the instrument, disconnect all cables to

prevent damage to the cables and injury to anyone who

might trip over them.

• When setting up the instrument, make sure the AC outlet

you are using is easily accessible. If some trouble or

malfunction occurs, immediately turn off the power

switch and disconnect the plug from the outlet. Even

when the power switch is turned off, electricity is still

flowing to the product at the minimum level. When the

unit is not in use for extended periods of time, unplug

the power cord from the wall AC outlet.

• When moving the instrument, move it gently avoiding

shocks and impacts. The instrument is sensitive to

shocks and may become damaged.

2/2

DMI-7