Yamaha YVN500S Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Instrumentos musicales Yamaha YVN500S. Yamaha YVN500S 10 páginas. Violin

Imprimir página

• Hook the loop end of the 1st string (E) onto the hook on the fine tuner.

String

Caution

•

Make sure that the endpin is in-

serted completely into the violin.

•

Make sure that the tailpiece wire is

properly hooked onto the endpin.

Insert the other end of the string into the hole

on the peg, then wrap the string onto the peg.

• On the 1st (E) and 2nd (A) strings, make

two windings to the left of the hole, then

the remaining windings to the right as

shown in the illustration on the far right.

• On the 3rd (D) and 4th (G) strings, make

two windings to the right of the hole,

then the remaining windings to the left as

shown in the illustration on the left.

Next, make sure that the bridge does not fall

over as you wind the strings. Ensure that the

strings pass over the corresponding grooves

on the top of the bridge.

(Make sure that the tailpiece side of the

bridge is standing vertical to the violin top.)

[Attaching the 1st String (E)]

Loop end

Fine Tuner

Tailpiece

Changing Strings

Fine Tuner

Loop end

Tailpiece wire

Endpin

Saddle

Winding the 3rd

and 4th strings

3rd string

Rotate

the peg

as shown

4th string

Tailpiece

Winding the 1st

and 2nd strings

2nd string

Rotate

the peg

as shown

1st string