Yamaha ARIUS YDP-165 Manual del usuario - Página 34

Navegue en línea o descargue pdf Manual del usuario para Teclado electrónico Yamaha ARIUS YDP-165. Yamaha ARIUS YDP-165 48 páginas.
También para Yamaha ARIUS YDP-165: Manual de instrucciones rápidas (2 páginas), Referencia Midi (4 páginas)

Imprimir página

Keyboard Stand Assembly

YDP-165, YDP-145 Assembly

You can watch a video of the assembly.

Scan the QR code at left or access the

website below.

https://4wrd.it/ydp_assembly_video1

Check if you have all of the items indicated below.

NOTICE

Make sure to place the main unit on the polystyrene foam

pads that have been removed from the packages. Position the

pads so that they will not contact the speaker covers on the

bottom of the main unit.

Speaker cover

Polystyrene foam pads

Cord holder

Side board (L)

× 4

Flat head screws (6 × 20 mm)

× 2

Thin screws (4 × 12 mm)

× 4

Thick screws (6 × 16 mm)

YDP-165

AC adaptor

Headphone hanger set

Headphone hanger

* The adaptor may not be included, or may look different from the

illustration above, depending on your particular area.

YDP-165, YDP-145, YDP-S55, YDP-S35 Owner's Manual

Main unit

Speaker cover

Back board

Pedal box

Side board (R)

× 4

Caps

× 4

Tapping screws

(4 × 20 mm)

YDP-145

Power cord

AC adaptor

× 2

Screws

(4 × 10 mm)

Align the side boards with each end

of pedal box, and lightly tighten

with flat head screws (6 × 20 mm)

for temporary fastening

These screws will be tightened securely later in

step 3.

Side board (R)

Pedal box

× 4

Flat head screws (6 × 20 mm)

Attach the back board.

Depending on the model, the surface color of one

side of the back board may be different from the

other side. In this case, position the back board so

that the side facing the front (pedal side) matches

the color of the main unit.

2-1

Place the back board on each foot of side

boards.

2-2

Attach the top of the back board by

temporarily fastening the thin screws (4 ×

12 mm).

2-3

While pushing on the lower part of the side

boards from the outside, secure the bottom

ends of the back board using tapping screws

(4 × 20 mm) in the order from outside to

inside (

→

Side board (L)