Yamaha AVANTGRAND N2 Manual del usuario - Página 28
Navegue en línea o descargue pdf Manual del usuario para Teclado electrónico Yamaha AVANTGRAND N2. Yamaha AVANTGRAND N2 49 páginas. Yamaha electronic keyboard user manual
También para Yamaha AVANTGRAND N2: Manual del usuario (49 páginas)
Imprimir página
Recording your Performance
3
Start recording.
Recording starts as soon as you play the keyboard.
Alternatively, press the [PLAY/STOP] button to start recording.
↓
The [RECORD] button indicator and the [PLAY/STOP] button indicator light
up.
4
Stop recording.
Press either the [RECORD] or [PLAY/STOP] button to stop
recording.
↓
Data writing will begin.
When the recording is finished, the "
display for three seconds.
CAUTION
Do not turn off the power to the instrument or disconnect the USB flash memory device, while the instru-
ment is recording the data (while "
data being recorded, will be lost.
5
Play back the recorded performance.
Press the [PLAY/STOP] button to start playback of the recorded performance.
Playing Back the Song Recorded to the Instrument
You can play back the song recorded to the instrument using the Record function (page 27). You can also play the key-
board along with the playback.
Refer to page 31 to playback the song recorded to a USB flash memory device.
2, 3
1
Engage User Song mode.
While holding down the [DEMO/SONG] button, press the
[+] or [-] button until "
2
Start playback.
Press the [PLAY/STOP] button to start playback.
3
Stop playback.
Press the [PLAY/STOP] button again to stop playback.
28
• N3/N2
Owner's Manual
End
" appears on the
---
" is displayed ). Otherwise, all recorded data, including the
1
1
Usr
" appears on the display.
If the metronome was on when you
started recording, you'll be able to keep
time with the metronome while record-
ing, but the metronome sound will not
be recorded.
If the memory becomes full during
recording, "
display and recording will stop automati-
cally. (All recorded data up to that point
will be retained.)
If you wish to erase previously recorded
data to the instrument, press the [PLAY/
STOP] button to start recording, then
End
press it again to stop recording. Do not
connect any USB device during this
operation.
The song data recorded to a USB flash
memory device can be erased by using a
computer.
When you record to a USB flash memory
device directly, if you select another
song or disconnect the USB device after
recording, the recorded performance
cannot be played back by pressing the
[PLAY/STOP] button. Refer to "Listening
to songs in USB Flash Memory" on page
31 to play back the song.
User song:
In this manual, the performance data
recorded to this instrument is called a
Usr
"User song".
" will appear on the
FUL