Yamaha Electone Stagea ELS-01C Manual rápido - Página 17
Navegue en línea o descargue pdf Manual rápido para Teclado electrónico Yamaha Electone Stagea ELS-01C. Yamaha Electone Stagea ELS-01C 40 páginas. Yamaha els-01c: supplementary guide
También para Yamaha Electone Stagea ELS-01C: Manual de novedades (8 páginas)
Imprimir página
The following setting lets you record only Lower Keyboard and Pedalboard
parts.
3
Press the [F] (Play) button, and start playing after the
hourglass icon disappears.
4
Press the [J] (Stop) button when you are finished with your
performance to stop recording.
Now you've recorded the first parts of your performance.
5
Press the [I] (Record) button to set up recording of the next
part—Upper part in this case.
A message appears prompting confirmation of operation. Select
[OVERWRITE] to overwrite and the Rec Standby display appears.
6
Select the parts for recording.
Set the next parts you want to record (in this case, the Upper part) to "REC."
Also set the part already recorded (in this case Lower and Pedal parts) to "PLAY,"
so you can hear the previously recorded parts as you record new ones.
7
Change the playback tempo for the selected part.
The playback tempo can be set over a range of 50% to 200% of the original.
The original recorded tempo is 100%; values less than 100% result in a slower
tempo while values greater than 100% result in a faster tempo.
8
Press the [CUSTOM PLAY] button to start recording of the new
part or parts (Upper part).
Playback of the previously recorded parts starts immediately.
The [CUSTOM PLAY] button is used here to record only the parts that have
been selected for recording, and plays back only those parts that have been
selected for playback. While you listen to the parts being played back, start
playing the melody on the Upper Keyboard.
When the end of the recorded performance is reached, playback is automatically
stopped. The length of a subsequently recorded part cannot exceed the length of
the previously recorded parts.
NOTE
You should also set the
Control button to "REC," in
order to record Registration
changes and expression
pedal operation.
NOTE
Use the TEMPO [RESET]
button in the display to reset
the tempo to its original
value (100%).
ELS-01/01C/01X Version 1.8 New Functions
7
17