Yamaha PortaTone PSR-84 Manual del usuario - Página 36

Navegue en línea o descargue pdf Manual del usuario para Teclado electrónico Yamaha PortaTone PSR-84. Yamaha PortaTone PSR-84 49 páginas. Yamaha electric keyboard owner's manual
También para Yamaha PortaTone PSR-84: Manual del usuario (49 páginas), Manual del usuario (49 páginas), (Spanish) Manual De Instrucciones (48 páginas)

Imprimir página

Yamaha PortaTone PSR-84 Manual del usuario

€ RECEIVE CHANNEL/CLOCK

The enable/disable status of all MIDI receive channels

is set via the MIDI section RECEIVE CH./CLOCK [A]

and [V] buttons. The [A] button increments the receive

channel number shown on the display and the [W] button

decrements the receive channel number. The receive chan-

nel number is shown on the right two digits of the MULTI

DISPLAY while the status — "E" for enabled or "d" for

disabled — appears on the leftmost digit. The MIDI chan-

nel and status display appears while selection is in

progress and for approximately 2 seconds after both MIDI

CH. buttons are released. A "C" in place of the channel

number (1 through 16) stands for "CLOCK," and allows

reception of the MIDI clock to turned on or off. If the

. [RECEIVE ON/OFF] button is used while the MIDI re-

ceive channel or clock display is showing, the status of the

channel or clock can be switched between "E" and "d."

NEN

Z-

(sl

mas

RECEIVE

CH/

CLOCK

116/0

SME

seuTVOCE

"BEAT

* Receive channel/clock settings apply to both the Remote Control

and Multi Voice receive modes.

* Separate receive channel/clock settings are retained in each

PAGE MEMORY even when the power is turned off (see "PAGE

MEMORY" on page 16 for details).

FEATURE REFERENCE (mipi)

The [MODE] button is used to select the MIDI receive

mode in which the PSR-84/PSR-85 is to operate —

Remote Control or Multi Voice.

Press the [MODE] button to call the mode display, then

use the same button to select "00" (Remote Control) or

"99" (Multi Voice).

SIAE SPUIT VOICE

SILE SPUI VOCE

„VOCE

VOCE

MODE

em,

- — 00

— — UI

LI!

Tas

C E N

nl su voce

* The MIDI MODE is automatically reset to "00" whenever the

power is turned on, when a different PAGE MEMORY is se-

lected, or when the DEMO function is used.

3 Bn

E The Remote Control Mode (Mode 00)

The Remote Control mode should be used when the

PSR-84/PSR-85 is to be connected to a second key-

board by which it is to be controlled. In this mode playing

the external keyboard has exactly the same effect as play-

ing the PSR-84/PSR-85 's own keyboard. Further the

PSR-84/PSR-85 panel controls can be used as normal.

This mode is automatically selected whenever the PSR-

84/PSR-85 is tumed on, when a different PAGE

MEMORY

is selected, or when the DEMO function is

used.

Data Received In the Remote Control Mode

The PSR-84/PSR-85 receives and responds to the

following data received via the MIDI IN connector when

the Remote Control mode is selected:

* In addition to note and velocity data, the PSR-84/PSR-

85 responds to program change, sustain ON/OFF, vi-

brato, volume, pan, reverb (PSR-85 only), start, stop,

and MIDI clock messages.

* Program change messages 00 through 99 correspond to

voices 00 through 99.