Yamaha HTR-3067 Manual de conexión

Navegue en línea o descargue pdf Manual de conexión para Receptor Yamaha HTR-3067. Yamaha HTR-3067 2 páginas. Home theater package

Imprimir página

YHT-2910 Home Theater Package

Connection Guide

English

The Yamaha YHT-2910 Home Theater Package includes everything you need to add great sound

to your home theater. By following the steps in this Connection Guide, you'll have your home

theater set up in no time and be enjoying music and movies like never before. Part A explains how

to connect the speakers and antennas. Part B explains how to connect various AV components.

See the relevant owner's manuals for full instructions and precautions.

Caution: Disconnect all components from AC outlets before proceeding.

Part A:

Speakers and Antennas

Checking the package contents

x 4

Unpack and check the package contents. The following items are necessary to complete this

Connection Guide. See the owner's manuals for a complete list of supplied items.

AV Receiver (HTR-3067)

Subwoofer (NS-SW20)

Remote control and two batteries

Front/surround speaker (NS-B20)

(AAA, R03, UM-4)

Center speaker (NS-C20)

YPAO microphone

Non-skid pad

AM antenna

Subwoofer cable

FM antenna (FM antenna type depends

Speaker cable

on destination country.)

Positioning the speakers

Front

The four front and surround

right

speakers are identical, so it

Front

doesn't matter which one you use

left

Center

in each position.

Subwoofer

Position the speakers as shown.

See the owner's manuals for more

information on installing the

speakers.

Surround

left

right

Preparing the cables and speakers

Center speaker

• Cut the included speaker cable to suitable lengths for the front, center, and surround

speakers. You need to make five cables altogether. Remove about 10 mm (3/8 in.) of

insulation from the end of each cable, and then twist the bare strands tightly.

• Connect the speaker cables to the front speakers ( ), surround speakers ( ), and center

speaker ( ). Make sure you connect the speakers with the correct polarity—positive (+)

terminals to positive (+) terminals, and negative (–) terminals to negative (–) terminals.

Connecting the front speakers

AV Receiver

To front right

speaker

Connect the front speaker ( ) cables to the AV Receiver. Make sure you connect the

speakers with the correct polarity—positive (+) terminals to positive (+) terminals, and

negative (–) terminals to negative (–) terminals.

Connecting the center and surround speakers

AV Receiver

To surround

right speaker

Connect the center speaker ( ) and surround speaker ( ) cables to the AV Receiver.

Make sure you connect the speakers with the correct polarity—positive (+) terminals

to positive (+) terminals, and negative (–) terminals to negative (–) terminals.

Connecting the subwoofer

AV Receiver

Subwoofer

cable

Use the included subwoofer cable ( ) to connect the Subwoofer's INPUT jack to the

AV Receiver's SUBWOOFER PRE OUT jack.

Connecting the antennas

AV Receiver

Connecting the AM antenna

Press and

hold

Insert

Release

Front, surround

speakers

Connect the AM antenna ( ) and FM antenna ( ) to the AV Receiver, as shown. See

the owner's manuals for more information about connecting antennas.

Part B: AV Components

RAGLH

Caution: Disconnect all components from AC outlets before proceeding.

Printed in China ZK47310

Connecting HDMI-capable components

If your TV and BD/DVD players or recorders or satellite/cable set-top box have HDMI

jacks, you can connect them via the AV Receiver. Using HDMI cables (not included),

connect the AV Receiver's HDMI OUT jack to an HDMI input on your TV, and

connect your BD/DVD players or recorders and satellite/cable set-top box to the AV

Receiver's HDMI 1(BD/DVD) and HDMI 2 jacks, respectively, as shown.

See the owner's manuals for more information about HDMI.

● Connecting your TV

AV Receiver

To front left

speaker

● Connecting your BD/DVD players or recorders,

satellite/cable set-top box

AV Receiver

To center

speaker

To surround

left speaker

BD/DVD players or

recorders

Subwoofer

Connecting your TV for audio output

You can listen to TV audio through the AV Receiver and speakers by connecting an

audio output on your TV to an audio input on the AV Receiver with, for example, an

optical digital audio cable (not included), as shown.

To listen to TV audio, select the appropriate input source on the AV Receiver.

AV Receiver

Your TV supports the Audio Return Channel function

• If your TV supports ARC (Audio Return Channel), this connection is

unnecessary.

• The Audio Return Channel is required the setting of HDMI function of the AV

Receiver before use. For details, see "Information on HDMI" in "HTR-3067

Owner's Manual".

AM antenna

FM antenna

Connecting your DVR/VCR

AV Receiver

Use a video pin cable (not included) to connect the AV Receiver's MONITOR OUT

jack to a composite video input on your TV, as shown.

Use AV pin cables (not included) to connect your DVR (digital video recorder) or

VCR to the AV Receiver's AV 5 and AV OUT jacks, as shown.

Connecting your CD player

AV Receiver

Satellite/cable set-top box

Use a digital coaxial cable (not included) to connect your CD player to the AV

Receiver's AV 3 COAXIAL(CD) jack, as shown.

Connecting your USB storage device or iPod

AV Receiver

USB storage device

Connect a USB storage device or a USB cable supplied with the iPod to the AV Receiver's

USB jack (on the front panel), as shown.

Almost Finished

• Connect the AV Receiver, Subwoofer, and your other AV components to suitable AC outlets.

• Turn on the AV Receiver first, then the Subwoofer and your other AV components.

• Install the batteries in the AV Receiver's remote control.

• The optimum crossover frequency setting on the AV receiver is 150–160 Hz.

• See the relevant owner's manuals for full operating instructions.

Time to enjoy your Yamaha Home Theater Package!

Now, relax and enjoy the great sound of your Yamaha Home Theater Package.

DVR/VCR

CD player

iPod