Yamaha HTR-5130 Manual del usuario - Página 26

Navegue en línea o descargue pdf Manual del usuario para Receptor Yamaha HTR-5130. Yamaha HTR-5130 42 páginas. Natural sound av receiver

Imprimir página
Yamaha HTR-5130 Manual del usuario
Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is
possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).
AUTOMATIC TUNING
1
Select "TUNER" as the input source.
TUNER
2
Select the reception band (FM or AM) confirming it in
the display.
FM/AM
3
TUNING
MODE
AUTO/MAN'L MONO
4
To tune to a higher frequency, press the right side once.
To tune to a lower frequency, press the left side once.
* If the station where tuning search stops is not the desired
one, press again.
* If the tuning search does not stop at the desired station
(because the signals of the station are weak), change to
the MANUAL TUNING method.
26

TUNING OPERATIONS

TAPE/MD
PHONO
CD
MONITOR
or
AUTO
TUNING
DOWN
UP
L
R
1
3 2 4
MANUAL TUNING
1
Select "TUNER" as the input source.
2
Select the reception band (FM or AM) confirming it in
the display.
FM/AM
3
TUNING
MODE
AUTO/MAN'L MONO
4
Tune to a desired station manually.
* For a continuous tuning search, press and hold the
button.
Notes
If you tune to an FM station manually, it is received in
monaural mode automatically to increase the signal quality.
HTR-5130RDS only
frequency of the received station is shown on the display. If
an RDS station that employs PS data service is received,
the frequency is then replaced by the station name. Refer to
page 32 for details.
TAPE/MD
CD
TUNER
PHONO
MONITOR
or
Turn the "AUTO"
indicator off.
DOWN
TUNING
UP
When tuned to a station, the