Yamaha RXV765 - RX AV Receiver Procedimientos de actualización del firmware
Navegue en línea o descargue pdf Procedimientos de actualización del firmware para Receptor Yamaha RXV765 - RX AV Receiver. Yamaha RXV765 - RX AV Receiver 5 páginas. Hooking up component video/analog audio game console to a rx-v665/htr-6260 with hdmi out to tv
También para Yamaha RXV765 - RX AV Receiver: Boletín de productos (2 páginas), Manual de instalación (2 páginas), Manual de configuración de códigos (1 páginas), Engancharse (2 páginas)
Imprimir página
________________________________________________________________________________
May, 2009
Subject: RX-V465/565/665/765 Firmware Update Version J030
Yamaha is pleased to offer the following firmware update to ensure the best possible performance and
features for your Yamaha RX-V465/565/665/765 AV Receiver. This firmware improves the video input
assignability to the analog audio input and stability for the HDMI connection with other CE products.
Requirements:
A personal computer capable of burning an audio CD
CD or DVD player* with digital audio connection (Optical or Coaxial, not HDMI)
*Note:
In some instances a DVD player or a BD player will not work for this update procedure,
so connecting a CD player is preferred
Note: CHECK THE UNIT'S FIRMWARE VERSION PRIOR TO DOING THIS UPDATE.
The firmware version consists of a letter followed by three numbers [ex. "J030"].
If the three numbers in the firmware version are 030 or higher, you DO NOT need to
perform this update.
How to check the unit's firmware version:
Press and hold the [STRAIGHT] button on the front panel and keep it pressed while you press
the [STANDBY/ON] button. Once the front panel displays "Advance Setup", release the
[STRAIGHT] button. Then, press and hold the [TONE CONTROL] button for about 3 seconds until
front panel display shows the version of firmware.
The following pages contain the firmware update instructions for Yamaha AV receiver
RX-V465/565/665/765. The outline of the update is as follows:
1.
Download the firmware
2. Connect digital audio with CD or DVD player
3. Enter firmware update mode
4. Play the update disc (Reprogramming)
5. Confirm update firmware version
Note: Executing this update will RESET the receiver's setting to factory default.
< IMPORTANT NOTICE >
Do not attempt to update your Yamaha receiver using any other data file except those provided
directly from the Yamaha website.
Follow the instructions carefully and do not attempt any other procedures not specified in the
instructions provided by Yamaha.
Improperly update products may cause improper operation, and any parts or service required to
restore proper operation will not be covered under the Yamaha Limited Warranty.
Firmware Update Procedure for RX-V465/565/665/765
and create an update disc (Audio CD)
Page 1 of 5