Yamaha A-S700 - Amplifier Manual del usuario - Página 4
Navegue en línea o descargue pdf Manual del usuario para Amplificador Yamaha A-S700 - Amplifier. Yamaha A-S700 - Amplifier 24 páginas. Yamaha a-s700 integrated amplifier owner's manual
También para Yamaha A-S700 - Amplifier: Manual del usuario (40 páginas)
Imprimir página
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1 To assure the tinest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2
Install this sound system in a well ventilated, cool, dry, clean
place - away from direct sunlight, heat sources, vibration,
dust, moisture, and/or cold. Allow ventilation space of at least
30
cm
(11-13/16
in) on the top,
20
cm (7-7/8 in) on the left
and right, and
20
cm (7 -7/8 in) on the back of this unit.
3
Locate this unit away from other electrical appliances, motors,
or transformers to avoid humming sounds.
4
Do not expose this unit to sudden temperature changes from
cold to hot, and do not locate this unit in an environment with
high humidity (Le. a room with a humidifier) to prevent
condensation inside this unit, which may cause an electrical
shock, tire, damage to this unit, and/or personal injury.
5
Avoid installing this unit where foreign objects may fall onto
this unit and/or this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
-
Other components, as they may cause damage and/or
discoloration on the surface of this unit.
-
Burning objects (i.e. candles), as they may cause tire,
damage to this unit, and/or personal injury.
-
Containers with liquid in them, as they may fall and
liquid may cause electrical shock to the user and/or
damage to this unit.
6
Do not cover this unit with a newspaper, tablecloth, curtain,
etc. in order not to obstruct heat radiation. If the temperature
inside this unit rises, it may cause fire, damage to this unit,
and/or personal injury.
7
Do not plug in this unit to a wall outlet until all connections
are complete.
8
Do not operate this unit upside-down. It may overheat,
possibly causing damage.
9
Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cable from the wall outlet,
grasp the plug; do not pull the cable.
11 Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
12 Only voltage specified on this unit must be used. Using this
unit with a higher voltage than specified is dangerous and may
cause fire, damage to this unit, and/or personal injury.
Yamaha will not be held responsible for any damage resulting
from use of this unit with a voltage other than specified.
13 To prevent damage by lightning, keep the power cable
disconnected from a wall outlet or the unit during a lightning
storm.
14 Do not attempt to modify or fix this unit. Contact qualified
Yamaha service personnel when any service is needed. The
cabinet should never be opened for any reasons.
15 When not planning to use this unit for long periods of time
(Le. vacation), disconnect the AC power plug from the wall
outlet.
16 Install this unit near the AC outlet and where the AC power
plug can be reached easily.
17 Be sure to read the "TROUBLESHOOTING" section in the
owner's manual on common operating errors before
concluding that this unit is faulty.
18 Before moving this unit, press POWER to tum off this unit
and then disconnect the AC power plug from the wall outlet.
iii
En
19 VOLTAGE SELECTOR (Asia and General models only)
The VOLTAGE SELECTOR on the rear panel of this unit
must be set for your local main voltage BEFORE plugging
into the wall outlet. Voltages are:
Asia model...
AC
220/230-240
V,
50/60
Hz
General model
AC
110/120/220/230-240
V,
50/60
Hz
20 The batteries shall not be exposed to excessive heat such as
sunshine, fire or like.
21 Excessive sound pressure from earphones and headphones
can cause hearing loss.
As long as this unit is connected to the AC wall outlet,
it is not disconnected from the AC power source even
if you tum off this unit by POWER or set it to the
standby mode by
(~
button on the remote control.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
This unit enters the standby mode when you press
POWER inward to the ON position and then press
(~
button on the remote control. In this state, this unit is
designed to consume a very small quantity of power.