Yamaha AG-Stomp Manual del usuario - Página 24

Navegue en línea o descargue pdf Manual del usuario para Amplificador Yamaha AG-Stomp. Yamaha AG-Stomp 32 páginas. Yamaha accoustic guitar/pre-amplifier owner's manual
También para Yamaha AG-Stomp: Manual de servicio (45 páginas), Lista de parches (1 páginas), (neerlandés) Manual (32 páginas)

Imprimir página

Utility Mode

The Utility Mode is used for the AG-Stomp's overall system settings for things such as the

footswitch, MIDI, external controllers, EXP. PEDAL jack, etc.

* In the following section, the abbreviation [FR 1] button refers to the [FEEDBACK REDUCTION 1] button, etc.

I About the Utility Mode

When in the Play Mode, press the [UTILITY] button

to enter the Utility Mode (the lamp lights).

When in the Utility Mode, press the [UTILITY] but-

ton to return to the Play Mode (the lamp turns off).

In the Utility Mode, MIDI messages cannot be

received. Use the Play Mode to receive MIDI

messages.

Also, individual Utility Mode settings are

saved when the Utility Mode is exited.

In the Utility Mode, it is possible to set the following

five functions. Use the MIC TYPE Select Switch to

select the function.

1: Footswitch Functions

2: MIDI Functions

3: External Control Settings

4: EXP Pedal Settings

5: Feedback Reduction Operating Mode

I Footswitch Functions

Press the [UTILITY] button and set the MIC TYPE

Select Switch to CONDENSER 1 ("

in the display).

G Select the Footswitch function.

Press the [LIMITER] button and use the [UP]/

[DOWN] buttons to set the function of Footswitches

(1-3).

PrG

•

: Use the Footswitches to select patches.

EFF

•

: Use the Footswitches to switch the ef-

fects ON/OFF.

Switch 1: Limiter

Switch 2: Chorus/Delay Effects

Switch 3: Reverb Effect

G Transmit Control Change Numbers

Sets the MIDI control change number that is trans-

mitted when the Footswitch is switched ON/OFF.

(Available only when the Footswitch Function is set

EFF

to "

".)

Press the [FR 1] button to display the value of the

currently selected setting in the display.

Press the Footswitch you want to set (the lamp

lights), and use the [UP]/[DOWN] buttons to set to

one of the following.

oFF

•

G Control Change Values transmitted when the

switch is OFF.

Sets the MIDI control change value that is transmit-

ted when the Footswitch is switched OFF. (Available

only when the Footswitch Function is set to "

Press the [FR 2] button to display the value of the

currently selected setting in the display.

Press the Footswitch you want to set (the lamp

lights), and use the [UP]/[DOWN] buttons to set.

•

G Control Change Values transmitted when the

switch is ON.

Sets the MIDI control change value that is transmit-

ted when the Footswitch is switched ON. (Available

F. S

" will appear

only when the Footswitch Function is set to "

Press the [FR 3] button to display the value of the

currently selected setting in the display.

Press the Footswitch you want to set (the lamp

lights), and use the [UP]/[DOWN] buttons to set.

•

I MIDI Functions

Press the [UTILITY] button and set the MIC TYPE

Select Switch to CONDENSER 2 ("

pear in the display).

G Create a MIDI Program Change Receive Table

Sets the corresponding patch that will be recalled

when a MIDI Program Change Number (referred to

as PRG No. from here on) is received.

: MIDI data is not transmitted.

: The Control Change Number

that is transmitted.

127

: The Control Change Value that is trans-

mitted.

127

: The Control Change Value that is trans-

mitted.

EFF

".)

EFF

".)

mmd

" will ap-