Yamaha DG-Stomp Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Amplificador Yamaha DG-Stomp. Yamaha DG-Stomp 32 páginas. Guitar pre-amplifier with effects
También para Yamaha DG-Stomp: Manual complementario (1 páginas), Manual de servicio (43 páginas)

Imprimir página

Amp Section

u Amp Select Switch (LEAD1-CLEAN2)

Selects one of the eight preset guitar amplifier types.

In the Utility Mode it is used to select functions you

want to set such as Foot Switch or MIDI functions,

etc.

i Gain Contol (GAIN)

Adjusts the amount of distortion.

* No sound will be produced if this knob is set to "0", even if

the Master Volume

level is increased.

o Master Volume (MASTER)

Sets the absolute volume of the tone wet with the

Gain Volume and Tone Controls.

* The MASTER knob's setting is saved in memory.

Effect Section

(Refer to: "Effect Functions and Parameters" on page 19)

!3 Compressor Button (COMP)

Switches the Compressor ON (lamp lit)/OFF (lamp

off).

!0 Tone Controls

(TREBLE, MIDDLE, BASS, PRESENCE)

Controls the sound level of each tone.

!1 Output Level Control (OUTPUT)

Controls the level of the signal delivered from the

DG-Stomp's output jacks (OUTPUT, PHONES)

* The OUTPUT knob's setting is not saved in the memory.

!2 Speaker Simulator Button (SP. SIM)

Switches the Speaker Simulator ON (lamp lit)/OFF

(lamp off).

Press the [SP. SIM] and [UTILITY] buttons simulta-

neously to select the simulator type. (

!4 Compressor Knob (COMP)

Adjusts the depth of the compressor's effect.

Turn to the right to increase the depth of the effect.

Nomenclature

page 14)