Yamaha DSP-A990 Manual de instrucciones - Página 34

Navegue en línea o descargue pdf Manual de instrucciones para Amplificador Yamaha DSP-A990. Yamaha DSP-A990 50 páginas. Digital sound field processing amplifier

Imprimir página

3. All sound field programs except CHURCH have two "sub-

programs" (see "2-7. DESCRIPTIONS OF THE SOUND FIELD

PROGRAMS"). The sub-programs are selected using the

Parameter +/– keys on the remote control unit. The CONCERT

HALL 1 program, for example, contains the sub-programs "Hall A

in Europe" and "Hall B in Europe". When the CONCERT HALL 1

program is first selected, the "Hall A in Europe" sub-program will

be selected and displayed on the front panel. To select "Hall B in

Europe", press the Parameter + or – key. To return to Hall A in

Europe, press the Parameter + or – key again. The same selection

procedure applies to all other programs.

The sub program selection can also be done simply by pressing

the corresponding Program Select key on the remote control.

If you will change the sub-program by pressing a Program

Select key while watching the monitor screen, press a key as

described below;

If the display type is a full display, press the key of the

corresponding program once. If the display type is a simple

display or no display, press the key twice.

CONCERT HALL 1

Hall A in Europe

CONCERT HALL 1

Hall B in Europe

2-5. MUTING THE EFFECT SOUND

The EFFECT switch on the front panel and the EFFECT ON/OFF

key on the remote control unit make it simple to compare the normal

stereo sound with the fully processed effect sound.

To mute the effect sound and monitor only the main sound, press

the EFFECT ON/OFF key or the EFFECT switch. Press the EFFECT

ON/OFF key or the EFFECT switch a second time to restore normal

operation.

2-6. SUPERIMPOSED VIDEO

PROGRAM/PARAMETER DISPLAY

You can select program names and edit parameters

watching their data displayed on your video monitor screen and

superimposed over the video image as described on page 6.

1. Turn your monitor on, and press the ON SCREEN display key

on the remote control unit to call the full display mode.

2. The current program name and its parameters will be displayed

on the monitor screen. The arrow-shaped cursor points to the

currently selected parameter. Parameters are selected and edited

using the Parameter Select keys and +/– keys. (See page 41 for

details.)