Yamaha THR10 Manual del usuario - Página 13

Navegue en línea o descargue pdf Manual del usuario para Amplificador Yamaha THR10. Yamaha THR10 21 páginas. Thr series
También para Yamaha THR10: Manual del usuario (23 páginas), Manual del usuario (22 páginas), Manual (14 páginas), Manual del usuario (20 páginas), Manual del usuario (20 páginas)

n Power

The THR10/5 can operate on either battery power or with the power adaptor.

* Power is automatically supplied from the power adaptor when the adaptor is connected to the unit with batteries

installed. To prevent batteries from leaking, we recommend that the batteries be removed from the unit when us-

ing the power adaptor.

l When using the power adaptor

Connect the supplied power adaptor to the DC IN jack located on the rear side of the THR10/5.

Connect the AC plug to a power outlet.

DC IN Jack

DC Plug

l When using batteries

Use AA alkaline batteries or nickel hydride batteries*.

Make sure that the batteries are installed with their +/- poles aligned properly as shown below.

* When using nickel hydride batteries, we recommend eneloop® batteries. When using eneloop batteries, please read

the eneloop battery instruction manual carefully. (eneloop® is a registered trademark of Sanyo Electric Co., Ltd.)

* Do not use manganese batteries.

* Follow the "CAUTION" section (pages 4-5) to use the product in a safe and proper manner.

The amp turns off automatically when battery power is depleted. After replacing the batteries or connect-

ing the power adaptor, turn the power switch OFF and wait for ten seconds before turning the power switch

back ON again.

THR10 (Bottom)

* Follow the "CAUTION" section (pages 4-5) to use the

product in a safe and proper manner.

Power Adaptor

(supplied)

THR5 (Rear)

AA Alkaline batteries or

nickel hydride batteries

x 8

Connection

AC Plug

AC Outlet