Yamaha YX10ZXPSL 2020 Manual de servicio - Página 12
Navegue en línea o descargue pdf Manual de servicio para Vehículo todoterreno Yamaha YX10ZXPSL 2020. Yamaha YX10ZXPSL 2020 21 páginas.
Imprimir página
Odometer and tripmeters
1
1. Odometer/Tripmeter A/Tripmeter B
2. "SELECT" button
3. "RESET" button
The odometer shows the total distance traveled
by the vehicle. The odometer can be used for
maintenance and service intervals.
The tripmeters show the distance traveled since
they were last reset. The tripmeters can be used
to record the distance traveled on a single trip, or
to estimate the distance that can be traveled
with a full tank of gas, etc.
Push the "SELECT" button to switch between
the odometer "ODO" and the tripmeters "TRIP
A" and "TRIP B" in the following order:
ODO → TRIP A → TRIP B → ODO
To reset a tripmeter, set the display to the trip-
meter you want to reset, then push the "RESET"
button until it is reset.
TIP
• The odometer will lock at 99999.
• The tripmeters will reset and continue counting
after 9999.9 is reached.
Clock, hour meter, voltage display and cool-
ant temperature display
1. Clock/Hour meter/Voltage display/Coolant
temperature display
2. "SELECT" button
3. "RESET" button
2 3
1 2 3
4
4. "MODE" button
The clock displays time in 12-hour format.
The hour meter shows the total time the engine
has been running.
The voltage display shows the battery voltage.
The coolant temperature display shows the tem-
perature of the coolant.
Push the "MODE" button to switch between the
clock "CLOCK", the hour meter "HOUR", the
voltage display "VOLTAGE", and the coolant
temperature display in the following order:
CLOCK → HOUR → VOLTAGE → coolant tem-
perature → CLOCK
[To set the clock]
1. Set the display to the clock.
2. Push both the "SELECT" button and "RE-
SET" button until the hour digits start flashing.
3. Push the "RESET" button to set the hours.
4. Push the "SELECT" button, and the minute
digits will start flashing.
5. Push the "RESET" button to set the minutes.
6. Push the "SELECT" button, and then release
it to start the clock.
[Voltage display]
1. Voltage display
This display shows "
When the battery voltage is low, "LO" will be dis-
played. When the battery voltage is high, "HI" will
be displayed.
ECB02020
NOTICE
If the voltage display indicates "LO" or "HI",
there may be trouble with the battery
charging circuit or the battery may be faulty.
If this occurs, check or repair the vehicle.
1-3
FEATURES
1
" and the battery voltage.