Yamaha CMA3SW Manual del usuario - Página 6
Navegue en línea o descargue pdf Manual del usuario para Sistema de altavoces Yamaha CMA3SW. Yamaha CMA3SW 36 páginas.
También para Yamaha CMA3SW: Manual del usuario (24 páginas)
Imprimir página
Connections
Connect the power amplifier and the VXS3S
Connect the OUTPUT of the power amplifier to the INPUT of the
subwoofer.
Power amplifier
INPUT
＋
－
6
VXS3SB / VXS3SW / CMA3SB / CMA3SW Owner's Manual
INPUT
Set the line voltage/impedance and power
Select the line voltage/impedance (70V/8Ω) and input wattage power tap
when using a 70V line distributed system.
NOTICE
• When using a low impedance connection, set the tap selector switch to the "8Ω"
position. Check the impedance shown around the tap selector switch, according to the
number of satellite speakers connected.
• When connecting speakers with high impedance, check the tap selector switch
settings indicated around the switch, and then set the tap according to the number of
satellite speaker connections (NONE/×2/×4) and the output (W).
Make sure that the input total of each speaker does not exceed the rated output of the
power amplifier.
• Do not set the tap selector switch to the "X" position.
If the setting is incorrect, it may cause malfunction of the speaker and amplifier.
• Make sure the amplifier is switched off before operating the tap selector switch.
High impedance connection
-Satellite speakers (NONE/×4)
Low impedance connection
-Satellite speakers (NONE/×2/×4)
High impedance connection
-Satellite speakers (×2)