Yamaha YST-SW005 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Sistema de altavoces Yamaha YST-SW005. Yamaha YST-SW005 19 páginas. Yamaha subwoofer system owner's manual
También para Yamaha YST-SW005: Manual del usuario (20 páginas), Manual de servicio (16 páginas), Manual de servicio (13 páginas)

Imprimir página

CAUTION: Read this before operating your unit.

G To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

G Install this unit in a cool, dry, clean place – away from windows,

heat sources, sources of excessive vibration, dust, moisture and

cold. Avoid sources of humming (transformers, motors). To

prevent fire or electrical shock, do not expose this unit to rain or

water.

G Never open the cabinet. If something drops into the set, contact

your dealer.

G To reduce the risk or fire or electric shock, do not expose this unit

to rain or moisture.

G Do not use force on switches, controls or connection wires.

When moving the unit, first disconnect the power plug and the

wires connected to other equipments. Never pull the wires

themselves.

G When not planning to use this unit for a long period (ie., vacation,

etc.), disconnect the AC power plug from the wall outlet.

G To prevent lightning damage, disconnect the AC power plug

when there is an electrical storm.

G Since this unit has a built-in power amplifier, heat will radiate

from the rear panel. Place the unit apart from the walls, allowing

enough space above, behind and on both sides of the unit to

prevent fire or damage. Furthermore, do not position with the

rear panel facing down on the floor or other surfaces.

For U.K., Europe and China models only

Be sure to allow space of at least 20 cm above, behind and on

both sides of the unit.

G Do not cover the rear panel of this unit with a newspaper, a

tablecloth, a curtain, etc. in order not to obstruct heat radiation. If

the temperature inside the unit rises, it may cause fire, damage

to the unit and/or personal injury.

G Do not place small metallic objects on this unit. Otherwise, the

object may fall, possibly causing an injury.

G Do not place the following objects on this unit:

Glass, china, etc.

If glass etc. falls by vibrations and breaks, it may cause

personal injury.

A burning candle etc.

If the candle falls by vibrations, it may cause fire and personal

injury.

A vessel with water in it

If the vessel falls by vibrations and water spills, it may cause

damage to the unit, and/or you may get an electric shock.

G Do not place this unit where foreign objects such as water drips

might fall. It might cause a fire, damage to this unit, and/or

personal injury.

G Never put a hand or a foreign object into the YST port. When

moving this unit, do not hold the port as it might cause personal

injury and/or damage to this unit.

G Never open the cabinet. It might cause an electric shock since

this unit uses a high voltage. It might also cause personal injury

and/or damage to this unit.

G When using a humidifier, be sure to avoid condensation inside

this unit by allowing enough spaces around this unit or avoiding

excess humidification. Condensation might cause a fire, damage

to this unit, and/or electric shock.

G Super-bass frequencies reproduced by this unit may cause a

turntable to generate a howling sound. In such a case, move this

unit away from the turntable.

G This unit may be damaged by using at high volume level when

20 Hz–50 Hz sine waves from a test disc, bass sounds from

electronic instruments, etc. are continuously inputted to this unit,

or when the stylus of a turntable touches the surface of a disc.

Reduce the volume level to prevent this unit from being

damaged.

Thank you for selecting this YAMAHA subwoofer system.

G If you hear distorted noise (i.e., unnatural, intermittent "rapping"

or "hammering" sounds) coming from this unit, reduce the

volume level. Extremely loud playing of a movie soundtrack's low

frequency, bass-heavy sounds or similarly loud popular music

passages can damage this speaker system.

G Vibration generated by super-bass frequencies may distort images

on a TV. In such a case, move this unit away from the TV set

G Do not attempt to clean this unit with chemical solvents as this

might damage the finish. Use a clean, dry cloth.

G Be sure to read the "TROUBLESHOOTING" section regarding

common operating errors before concluding that the unit is faulty.

G Secure placement or installation is the owner's responsibility.

YAMAHA shall not be liable for any accident caused by

improper placement or installation of speakers.

G VOLTAGE SELECTOR

(China and General models only)

The VOLTAGE SELECTOR on the

rear panel of this unit must be set

for your local main voltage BEFORE

plugging into the AC main supply.

Voltages are 110-120/220-240 V AC, 50/60 Hz.

For U.K. customers

If the socket outlets in the home are not suitable for the plug

supplied with this appliance, it should be cut off and an appropriate 3

pin plug fitted. For details, refer to the instructions described below.

Note: The plug severed from the mains lead must be destroyed, as a

plug with bared flexible cord is hazardous if engaged in a live socket

outlet.

SPECIAL INSTRUCTIONS FOR U.K. MODEL

IMPORTANT:

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this apparatus

may not correspond with the coloured markings identifying the

terminals in your plug, proceed as follows: The wire which is

coloured BLUE must be connected to the terminal which is

marked with the letter N or coloured BLACK. The wire which is

coloured BROWN must be connected to the terminal which is

marked with the letter L or coloured RED. Making sure that neither

core is connected to the earth terminal of the three pin plug.

For Canadian Customers

To prevent electric shock, match wide blade of plug to wide slot

and fully insert.

This Class B digital apparatus complies with Canadian ICES-003.

Standby mode

If the POWER switch is set to the ON position and the AUTO

STANDBY switch is set to the HIGH or LOW position, this unit

turns into the standby mode when no signal is received by this

unit for 7 to 8 minutes.

In this state, this unit is designed to consume a very small

quantity of power.

This unit features a magnetically shielded design, but there is still

a chance that placing it too close to a TV set might impair picture

color. Should this happen, move this unit away from the TV set.

110V-120V

VOLTAGE

SELECTOR

220V-240V

E-