Clark & Clark Speciality Products P1059 Instrucciones de instalación - Página 2

Navegue en línea o descargue pdf Instrucciones de instalación para Accesorios para automóviles Clark & Clark Speciality Products P1059. Clark & Clark Speciality Products P1059 2 páginas. Self-triggering prop for mgb trunk lid or hood and mg midget trunk lid

Imprimir página

Hood Prop may be located on either side of the engine compartment, depending on model year.

Installation is the same on either side.

Problems?

Note how the bolt head must sit in the recess to avoid interference with the striker.

If your hood will not close, and it appears the prop is hitting the radiator shroud,

this is the true problem.

You may grind the bold head down for extra clearance, if desired.

#P1033, P1059, P1060

Note: MGB hood bracket may be bent inward,

or removed and reversed for added clearance.

Note: safety pin holes are provided on these props.

When in the open/latched position, a safety pin may

be inserted through the inner and outer channels to

prevent inadvertent unlatching of the prop (use this

in windy weather!).