Directed 403.MIT3 Manual de instalación - Página 8

Navegue en línea o descargue pdf Manual de instalación para Accesorios para automóviles Directed 403.MIT3. Directed 403.MIT3 20 páginas.

Imprimir página
Directed 403.MIT3 Manual de instalación

Vehicle connections

The connection information listed below is specific to the 2008 Mitsubishi Lancer. Refer to "Pre-installation and application warnings" for a list of important notes.
Data 14-pin blue connector (H1)
Module
Conn./Pin
Color
H1/1
Light Green
H1/2
Violet/Yellow
H1/3
Tan/Black
H1/4
Tan
H1/5
Orange/Green
H1/6
Orange/Brown
H1/7
Brown
H1/8
Yellow
H1/9
Orange/Yellow
H1/10
Orange/Red
H1/11
Yellow/Red
H1/12
Brown/Red
H1/13
Red
H1/14
Black
Output 12-pin red connector (H2)
Module
Conn./Pin
Color
H2/1
Black/White
H2/2
Green/Black
H2/3
Green/White
H2/4
Red/Black
H2/5
Violet/White
H2/6
Gray
H2/7
Gray/Black
H2/8
Violet/Green
H2/9
Violet/Brown
H2/10
Yellow/Black
H2/11
Orange/Black
H2/12
Blue/Red
8
403.MIT3 2.11 2008 Mitsubishi Lancer
©2023 Directed. All rights reserved.
Description
No Connection
No Connection
(DATA) HS CAN High 1
(DATA) HS CAN Low 1
(DATA) HS CAN High 2
(DATA) HS CAN Low 2
Relay N.O. - No Connection
Relay COM. - No Connection
Relay N.C. - No Connection
Relay N.C. - No Connection
Relay COM. - No Connection
Relay N.O. - No Connection
(+) W2W Only - 12 Volt
(-) W2W Only - Ground
Description
(-) W2W Only - E-Brake Output
(-) Auto Headlamp Shutoff Output
(-) W2W Only - Door Output
(-) W2W Only - Trunk Output
[2]
(AC) W2W Only - Tach Output
(+) W2W Only - Brake Output
No Connection
No Connection
No Connection
No Connection
No Connection
(-) W2W Only - Hood Output
Connects To
Wire Location
No Connection
No Connection
data link connector, black 16 pin plug, pin 6
data link connector, black 16 pin plug, pin 14
Wireless Control Module on key switch, white 12 pin plug, pin 11
Wireless Control Module on key switch, white 12 pin plug, pin 10
No Connection
No Connection
No Connection
No Connection
No Connection
No Connection
dash fuse box, black 2 pin plug, pin 1
Connects To
Wire Location
Remote Starter
dash fuse box, brown 16 pin plug, pin 16
Remote Starter
Remote Starter
Remote Starter
The tach wire is an optional connection required on some remote starters,
which do not support a tach signal in D2D.
Remote Starter
No Connection
No Connection
No Connection
No Connection
No Connection
Remote Starter
(+/-)
Wire Color
data
yellow/green
data
violet
data
yellow
data
lt. green
+
white (80A)
(chassis ground)
(+/-)
Wire Color
-
yellow