Clark Synthesis TACTILE SOUND TST239 Manual de instalación - Página 7

Navegue en línea o descargue pdf Manual de instalación para Transductor Clark Synthesis TACTILE SOUND TST239. Clark Synthesis TACTILE SOUND TST239 20 páginas. Platinum, gold, silver and all weather transducers
También para Clark Synthesis TACTILE SOUND TST239: Ficha de datos (1 páginas)

Imprimir página
Installation Type: T-Nut
Requires initial access to the top of the material to
insert the T-Nut, which installs flush to the surface.
(Drill a 7/16" hole for the T-Nut.)
Minimum 3-1/2" vertical space required,
including 1/2" clearance between the
Transducer and the floor.
3/4"-thick
mounting
surface
Flat Washer
Lock Washer
Transducer Lead Wire
www.clarksynthesis.com
Drill 7/16" hole
T-Nut
NEVER TIGHTEN
BY TURNING THE
Jam Nut (up)
TRANSDUCER.
MAKE SURE TO
3/8"-16
TIGHTEN THE JAM
Threaded Stud
NUT AGAINST THE
Jam Nut (down)
TRANSDUCER'S
BRASS NUT
Washers
Jam Nuts
Installation: Overview
Installation Type: Hex Bolt
For use with metal or other high-tensile mounting
surfaces no thicker than 1/4". Requires access to the
top of the mounting surface both to install the bolt and
to tighten it.
Minimum 3-1/4" vertical space required,
including 1/2" clearance between the
Transducer and the floor.
Maximum 1/4"-thick
mounting
surface
Lock Washer
Transducer Lead Wire
Tactile Sound Transducers
Drill 7/16" hole
3/8"-16
Hex Bolt
Flat Washer
Jam Nut (up)
Jam Nut (down)
Flat Washer
Lock Washer
Jam Nuts
7