Clark Synthesis TST429 Manual de instalación - Página 2
Navegue en línea o descargue pdf Manual de instalación para Transductor Clark Synthesis TST429. Clark Synthesis TST429 8 páginas. Platinum, gold, silver and all weather transducers
También para Clark Synthesis TST429: Manual complementario (4 páginas), Manual de instalación (1 páginas), Manual del comprador (2 páginas), Manual de instalación (20 páginas), Especificación (1 páginas), Manual de instalación (20 páginas)
Imprimir página
Introduction
Before you drill holes and run wires, take a few moments to review this Installation Guide. Then
plan out the steps you'll need to take for your particular application. This will save you time in the
end and reduce the possibility of errors and/or damage to the transducer.
Thank you for purchasing a Clark Synthesis™ Tactile Sound™
Transducer, and welcome to the amazing world of Tactile Sound!
For many years, Clark Synthesis has been giving its customers
the ability to experience sound in a completely different way. As
you know, most of the sound we hear reaches our ears via
airborne vibrations, like those produced by loudspeakers.
However, there are four additional pathways through which we
perceive acoustic energy, all of which fall into the category of
tactile sound. These additional pathways include:
• Deep tissue and muscle mass ("Kinesthetic")
• Skeletal joints ("Haptic")
• Skin sensation (sense of touch)
• Bone conduction (skull-to-cochlea transmission)
To capitalize on these additional means by which we perceive
acoustic energy, Tactile Sound Transducers have been designed
to send high-quality audio to the listener by producing vibrations
over a full range of tactile and audible frequencies. When
attached to a resonant surface, the Transducers supplement
ordinary speakers and subwoofers, effectively increasing the
proportion of tactile sound. Consequently, you feel the natural
percussive impact of sounds, bringing life to sound effects like
hard footsteps, door slams, plucked strings, drum beats, and
explosive movie effects, all while enjoying greater clarity, depth,
and realism.
Additionally, because Transducers increase the perceived
"loudness" of the sound you are hearing, you are able to lower
the volume on your system to a level that is both safer for your
ears and less bothersome to neighbors.
tactile sound transducer
1
Some of the most common applications for Tactile Sound
Transducers include home theaters, listening rooms, outdoor
decks, military simulators, theme park attractions, game
chairs, professional music, and swimming pools.
In home theaters and listening rooms, our Transducers provide
the user with a greater depth of experience when watching
movies, listening to music, and playing video games.
For outdoor applications, our AW339-All Weather Transducers
mount underneath decks, keeping the audio equipment out-of-
sight while transferring audio to the surface of the deck.
Many military and flight simulator companies use our TST329-
Gold Transducers to bring a greater sense of realism to training
exercises.
Pool enthusiasts use our AC339-Aquasonic™ underwater pool
speakers to send full-range audio into the water, providing
high-quality underwater music.
As you can see, the uses for our Transducers are many and the
experience is amazing! We are glad you chose Clark Synthesis
Transducers and we hope your listening experience using our
products takes you to new levels of acoustical enjoyment!
www.clarksynthesis.com
United States Warranty and Return Policy
TACTILE SOUND TRANSDUCER WARRANTY
Clark Synthesis, Inc. warranties Transducers TST239, TST329, TST429, and AW339 to be free from defects and workmanship under normal use for a period
of two (2) years from date of original purchase. For industrial or commercial use, the warranty period is six (6) months.
Should warranty service be necessary, Clark Synthesis, Inc. will (at its discretion) repair or replace the defective merchandise with equivalent
merchandise at no charge.
This warranty is valid for the original purchaser and is not extended to subsequent owners. Any applicable implied warranties are limited in
duration to a period of the express warranty as provided herein beginning with the date of the original purchase at retail, and no warranties,
whether expressed or implied, shall apply to this product thereafter. Some states do not allow limitations on implied warranties; therefore these
exclusions may not apply to you. This warranty gives you specific legal rights; however, you may have other rights that vary state to state.
WHAT IS NOT COVERED
This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover the following:
• Damage caused by water or excessive heat
• Damage through negligence, misuse, accident, or abuse
• Damage caused by incorrectly mounting the transducer
• Damage due to not using an appropriate amplifier
• Freight damage
• Items previously repaired by unauthorized repair facility
• Items damaged due to amplifier clipping and/or distortion
• Items returned from unauthorized individuals or dealers
• Cost of shipping product to Clark Synthesis, Inc.
• Return shipping on non-defective items
RETURN POLICY
New, unused items purchased from us may be returned within 7 days of the purchase date. Please note: Clark Synthesis will only accept
returns for items that are received in their original packaging, in undamaged and re-sellable (new) condition. Manuals, accessories, warranty
cards, and everything else that came with the unit must be included as well. If your return does not meet these conditions, you will be charged
a 15% restocking fee or have the merchandise returned to you at your expense. Non-defective merchandise can also be returned for a
15% restocking fee. Shipping charges for all non-defective returns or exchanges are not refundable.
WHAT TO DO IF YOU NEED WARRANTY OR SERVICE
If it becomes necessary for you to return defective merchandise, call Clark Synthesis Customer Service at 303. 797.7500 and you will be given a
Return Authorization Number. Follow the instructions provided by our customer service staff, use suitable packing materials (preferably the
original shipping boxes), and make sure to write your Return Authorization Number on the outside of your box when sending your return to us.
Orders that are returned without a Return Authorization Number may be refused by our returns department!
Remember to include a dated proof of purchase from an authorized dealer. Freight must be prepaid: items received freight collect will be refused.
Make sure the following is included in your package:
• Product to be returned (repacked in original shipping containers)
• Return Authorization Number printed on the outside of the box
• Copy of original invoice with Return Authorization Number printed on it
Return to our Service Department:
RA#: _______________
Clark Synthesis, Inc.
8020 Southpark Circle, Suite 600
Littleton, Colorado 80120
INTERNATIONAL WARRANTY
Contact your International Clark Synthesis dealer or distributor concerning specific procedures for your country's warranty policies.
www.clarksynthesis.com
Warranty
tactile sound transducer
14